M!DGE router

https//www.racom.eu/eng/products/m/midge2/MIDGE_router.html

Print version

1. M!DGE router

1.1. Introduction

Although M!DGE wireless routers have been specifically designed for SCADA and telemetry, they are well suited to a variety of wireless applications. M!DGE HW and SW are ready to maintain reliable and secure connections from a virtually unlimited number of remote locations to a central server. Both standard Ethernet/IP and serial interfaces are available. Moreover, a digital input and a digital output can be used for direct monitoring and control of application devices; the second DI and DO are available using an extension module.

M!DGE versatility is further enhanced by four independent Ethernet ports. These can be configured to either support independent LANs (e.g. LAN and WAN settings), or simply connect up to four devices within one LAN (effectively replacing an Eth switch). M!DGE software is based on proven components, including an Embedded Linux operating system and standard TCP/IP communication protocols.

Thanks to the compact size and versatility of M!DGE, wireless routers prove indispensable in many SCADA and telemetry, as well as POS, ATM, lottery and security/surveillance applications.

M!DGE together with RACOM RipEX radio router offers an unrivalled solution for combining cellular and UHF/VHF licensed radios in a single network.

1.2. Key features

Mobile Interface Parameters

  • Mobile Connection options: LTE, HSPA+, HSDPA, HSUPA, UMTS, EDGE, GPRS and GSM

  • Global connectivity

  • Transparent hand-over between 2G, 3G and 4G

Power supply

  • Input voltage: 12 – 24 VDC

  • Average power consumption: 7 W

Services / Networking

  • Fallback Management

  • Connection supervision, Automatic connection recovery

  • Quality of Service (QoS)

  • OpenVPN, IPsec, PPTP, GRE, Dial-In, Mobile IP

  • VRRP

  • OSPF, BGP

  • DHCP server, DNS proxy server, DNS update agent, NTP

  • Telnet server, SSH server, Web server

  • Device server, Protocol server, SDK, LXC containers

  • Port Forwarding (NAPT), Firewall, Access Control Lists

  • Modbus TCP – Modbus RTU conversion

Interfaces

  • 4 Ethernet ports: LAN, WAN/LAN

  • RS232

  • 1× DI, 1× DO

  • USB host

Diagnostic and Management

  • Web interface, CLI available

  • File configuration

  • OTA SW update

  • Advanced troubleshooting

  • SMS remote control, SMS and E-mail notification

  • SNMPv1/v2c/3

1.3. Standards

Safety / HealthEN 62368-1:2014
EN 62311:2008
EMCEN 55032:2015
EN 55035:2017
EN 61000-6-2:2016
EN 61000-6-3:2007+A1:2011+AC:2012
EN 61000-6-5:2015
EN 301 489-1 V2.1.1
EN 301 489-3 V2.1.1
EN 301 489-7 V1.3.1
EN 301 489-17 V3.2.0
EN 301 489-24 V1.5.1
EN 301 489-52 V1.1.1
RF SpectrumEN 300 328 V2.1.1
EN 301 511 V9.0.2
EN 301 908-1 V11.1.1
EN 301 908-2 V11.1.1
EN 301 908-13 V11.1.1
Vibration & shock

EN 60068-2-6:2008

ETS 300 019-2-3:1994, Class 3.4

EN 61850-3:2014
SeismicEN 60068-2-27:2010
Environmental

EN 61850-3:2014

IEEE 1613:2009

©  2024 RACOM s.r.o. All Rights Reserved.