RipEX
Application notes

List of Figures

1.1. Network 1

1.2. Network with subnets

1.3. Network with standard masks

1.4. Network with narrowed masks

2.1. Record of communication between manager and agent

2.2. RipEX MIB in Zenoss

2.3. Setting SNMP Manager parameters in Zenoss

2.4. Setting SNMP Cycle Interval in Zenoss

2.5. Template for RipEX in Zenoss

2.6. Graph settings in Zenoss

2.7. Displaying graphs for a specific device in Zenoss

3.1. Modulated signal spectrums. (left) 2CPFSK with R=10.4 kBaud, modulation index h~0.6. (right) 2CPFSK with R=17.3 kBaud, modulation index h~0.2. 30 dB attenuator used in series.

3.2. Modulated signal spectrums. (left) 4CPFSK with R=10.4 kBaud, modulation index h~0.3. (right) 4CPFSK with R=17.3 kBaud, modulation index h~0.1.

3.3. Modulated signal spectrums. (left) π/4-DQPSK with R=17.3 kBaud, (right) 16-DEQAM with R=17.3 kBaud.

3.4. Maximum usable sensitivity measurement results for different settings of exponential modulations.

3.5. Maximum usable sensitivity measurement results. Channel separation 25 kHz.

4.1. Autospeed - initial situation

4.2. Autospeed - problem

4.3. Autospeed - solution

5.1. Crosslink serial cable

5.2. Back2Back in bridge mode

5.3. Back2Back in router mode

6.1. RipEX - MR400 in Bridge mode

6.2. Crosslink serial cable

6.3. RipEX - MR400 in Router mode

7.1. RS485 and Radio network

7.2. ACK Off

7.3. RS485 connection

8.1. Modbus RTU

8.2. Modbus RTU with multiple Masters

8.3. Modbus TCP

8.4. Modbus TCP local

8.5. Modbus TCP - RTU

8.6. Modbus TCP, Slave RTU or TCP

8.7. Modbus TCP, Slave RTU or TCP