RacomRay DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32, TimeTicks, Counter32, Gauge32, Integer32, Counter64, IpAddress, mib-2, enterprises FROM SNMPv2-SMI DateAndTime, TEXTUAL-CONVENTION FROM SNMPv2-TC snmpTraps FROM SNMPv2-MIB; racom MODULE-IDENTITY LAST-UPDATED "201905130000Z" ORGANIZATION "Racom s.r.o" CONTACT-INFO "Racom s.r.o Mirova 1283 592 31 Nove Mesto na Morave Czech Republic Tel: +420 722 937 522 Fax: +420 565 659 512 E-mail: racom@racom.eu" DESCRIPTION "The MIB module defines management objects for RAy product series." REVISION "201905130000Z" DESCRIPTION "Latest version of this MIB module" ::= { enterprises 33555 } Tenths ::= TEXTUAL-CONVENTION DISPLAY-HINT "d-1" STATUS current DESCRIPTION "Numeric 32-bit type with 0.1 precision without subtyping." SYNTAX Integer32 Hundredths ::= TEXTUAL-CONVENTION DISPLAY-HINT "d-2" STATUS current DESCRIPTION "Numeric 32-bit type with 0.01 precision without subtyping." SYNTAX Integer32 Thousandths ::= TEXTUAL-CONVENTION DISPLAY-HINT "d-3" STATUS current DESCRIPTION "Numeric 32-bit type with 0.001 precision without subtyping." SYNTAX Integer32 DisplayStringRaw ::= TEXTUAL-CONVENTION DISPLAY-HINT "1t" STATUS current DESCRIPTION "Unlimited display string - UTF8 encoding." SYNTAX OCTET STRING PhysAddressRaw ::= TEXTUAL-CONVENTION DISPLAY-HINT "1x" STATUS current DESCRIPTION "Unlimited physic address - hexadecimal encoding for each octet." SYNTAX OCTET STRING ServiceState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "System service or device state." SYNTAX INTEGER { na (0), -- service/device state not available up (1), -- service is running or device is up down (2) -- service is not running or device is down } AlarmState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Alarm status." SYNTAX INTEGER { na (0), -- alarm state not available up (1), -- alarm up down (2), -- alarm down ack (3) -- alarm up and acknowledged } OptionSetting ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Setting of some options." SYNTAX INTEGER { na (0), on (1), off (2) } ModulationList ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Radio channel modulations numerical list" SYNTAX INTEGER { na (0), qpsk (1), qam16 (2), qam32 (3), qam64 (4), qam128 (5), qam256 (6) } ray OBJECT IDENTIFIER ::= { racom 1 } station OBJECT IDENTIFIER ::= {ray 1} interface OBJECT IDENTIFIER ::= {ray 2} statistic OBJECT IDENTIFIER ::= {ray 3} switch OBJECT IDENTIFIER ::= {ray 4} rayTraps OBJECT IDENTIFIER ::= {ray 10} ray2Traps OBJECT IDENTIFIER ::= {ray 11} -- station MIB product OBJECT IDENTIFIER ::= {station 1} info OBJECT IDENTIFIER ::= {station 2} status OBJECT IDENTIFIER ::= {station 3} chassis OBJECT IDENTIFIER ::= {station 4} system OBJECT IDENTIFIER ::= {station 5} access OBJECT IDENTIFIER ::= {station 6} authorization OBJECT IDENTIFIER ::= {station 7} alarm OBJECT IDENTIFIER ::= {station 8} -- product MIB productName OBJECT-TYPE SYNTAX DisplayStringRaw (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Product name." ::= { product 1 } serialNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Product serial number." ::= { product 2 } unitType OBJECT-TYPE SYNTAX DisplayStringRaw (SIZE(0..4)) MAX-ACCESS read-only STATUS current DESCRIPTION "Station type (L or H) and number of the Ethernet ports (1 or 2)." ::= { product 3 } -- info MIB deviceName OBJECT-TYPE SYNTAX DisplayStringRaw (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Station name." ::= { info 1 } swVer OBJECT-TYPE SYNTAX DisplayStringRaw (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Firmware version." ::= { info 2 } swVerRadio OBJECT-TYPE SYNTAX DisplayStringRaw (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "Radio firmware version." ::= { info 3 } -- status mib systemStatus OBJECT-TYPE SYNTAX INTEGER { na (0), ok (1), warning (2), alarm (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Unit status." ::= { status 1 } lineStatus OBJECT-TYPE SYNTAX INTEGER { na (0), ok (1), analyzer (2), connecting (3), searching (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Radio link status. Supported by RAy10 only." ::= { status 2 } peerNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peer station serial number." ::= { status 3 } rfPowerStatus OBJECT-TYPE SYNTAX INTEGER { na (0), ok (1), fail (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "RF Power amplifier OK/Failure." ::= { status 4 } searchModeDisabled OBJECT-TYPE SYNTAX OptionSetting MAX-ACCESS read-only STATUS current DESCRIPTION "Search mode disabled on/off. Supported by RAy10 only." ::= { status 5 } ethPeer OBJECT-TYPE SYNTAX ServiceState MAX-ACCESS read-only STATUS current DESCRIPTION "Peer station user Ethernet link status. Not supported by RAy2." ::= { status 6 } securePeerMode OBJECT-TYPE SYNTAX OptionSetting MAX-ACCESS read-only STATUS current DESCRIPTION "Secure peer mode. Not supported by RAy10." ::= { status 7 } lineStatusII OBJECT-TYPE SYNTAX INTEGER { na (0), setup (1), single (2), connecting (3), authorizing (4), ok (5), analyzer (6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Radio link status. Not supported by RAy10." ::= { status 8 } eth1Link OBJECT-TYPE SYNTAX ServiceState MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet 1 link status. Supported by RAy2 only." ::= { status 9 } eth2Link OBJECT-TYPE SYNTAX ServiceState MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet 2 link status. Supported by RAy2 only." ::= { status 10 } -- chassis mib temperatureModem OBJECT-TYPE SYNTAX Hundredths (-10000..10000) UNITS "deg C" MAX-ACCESS read-only STATUS current DESCRIPTION "Modem temperature in hundredths of Celsius." ::= { chassis 1 } temperatureRadio OBJECT-TYPE SYNTAX Hundredths (-10000..10000) UNITS "deg C" MAX-ACCESS read-only STATUS current DESCRIPTION "Radio temperature in hundredths of Celsius." ::= { chassis 2 } voltageUnit OBJECT-TYPE SYNTAX Tenths (0..1000) UNITS "V" MAX-ACCESS read-only STATUS current DESCRIPTION "Power supply voltage in tenths of Volts." ::= { chassis 3 } voltageSource OBJECT-TYPE SYNTAX INTEGER { na (0), aux (1), poe (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Source of supply voltage. Supported by RAy2 only." ::= { chassis 4 } -- system mib useCpu OBJECT-TYPE SYNTAX Integer32 (0..100) UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "System use CPU in %." ::= { system 1 } useMemory OBJECT-TYPE SYNTAX Integer32 (0..100) UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "System use memory in %." ::= { system 2 } useLogStorage OBJECT-TYPE SYNTAX Integer32 (0..100) UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "Use storage for log in %." ::= { system 3 } -- access mib sshd OBJECT-TYPE SYNTAX INTEGER { on (1), onlykey (2), off (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Management interface: SSH." ::= { access 1 } telnetd OBJECT-TYPE SYNTAX OptionSetting MAX-ACCESS read-only STATUS current DESCRIPTION "Management interface: Telnet." ::= { access 2 } httpd OBJECT-TYPE SYNTAX OptionSetting MAX-ACCESS read-only STATUS current DESCRIPTION "Management interface: HTTP." ::= { access 3 } ip OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Management interface: IP address." ::= { access 4 } mac OBJECT-TYPE SYNTAX PhysAddressRaw MAX-ACCESS read-only STATUS current DESCRIPTION "Management interface: MAC address." ::= { access 5 } managementVlan OBJECT-TYPE SYNTAX OptionSetting MAX-ACCESS read-only STATUS current DESCRIPTION "Management interface: VLAN on/off." ::= { access 6 } managementVlanId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Management interface: VLAN ID." ::= { access 7 } wifiHAP OBJECT-TYPE SYNTAX INTEGER { na (0), disabled (1), enabled-on-air-link-loss (2), force-enabled (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Management interface: WiFi Host Access Point. Supported by RAy2 only." ::= { access 8 } -- authorization mib keyTable OBJECT-TYPE SYNTAX SEQUENCE OF KeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of product key entries. Supported by RAy10 only." ::= { authorization 1 } keyEntry OBJECT-TYPE SYNTAX KeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Product key entry. Supported by RAy10 only." INDEX { keyName } ::= { keyTable 1 } KeyEntry ::= SEQUENCE { keyName DisplayStringRaw } keyName OBJECT-TYPE SYNTAX DisplayStringRaw (SIZE(1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "Product key name. Supported by RAy10 only." ::= { keyEntry 1 } -- alarm mib alarmTemperature OBJECT-TYPE SYNTAX AlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "Temperature alarm state. Supported by RAy2 only." ::= { alarm 1 } alarmVoltageLow OBJECT-TYPE SYNTAX AlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "Low voltage alarm state. Supported by RAy2 only." ::= { alarm 2 } alarmVoltageHigh OBJECT-TYPE SYNTAX AlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "High voltage alarm state. Supported by RAy2 only." ::= { alarm 3 } alarmRss OBJECT-TYPE SYNTAX AlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "RSS alarm state. Supported by RAy2 only." ::= { alarm 4 } alarmSnr OBJECT-TYPE SYNTAX AlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "SNR alarm state. Supported by RAy2 only." ::= { alarm 5 } alarmBer OBJECT-TYPE SYNTAX AlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "BER alarm state. Supported by RAy2 only." ::= { alarm 6 } alarmPeerDisconnected OBJECT-TYPE SYNTAX AlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "Peer disconnect alarm state. Supported by RAy2 only." ::= { alarm 7 } alarmEth1Down OBJECT-TYPE SYNTAX AlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet 1 Link Down alarm state. Supported by RAy2 only." ::= { alarm 8 } alarmEth2Down OBJECT-TYPE SYNTAX AlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet 2 Link Down alarm state. Supported by RAy2 only." ::= { alarm 9 } alarmRfPowerFail OBJECT-TYPE SYNTAX AlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "RF Power Fail alarm state. Supported by RAy2 only." ::= { alarm 10 } alarmNetBitrate OBJECT-TYPE SYNTAX AlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "Air Speed below Limit alarm state. Supported by RAy2 only." ::= { alarm 11 } alarmWifiOn OBJECT-TYPE SYNTAX AlarmState MAX-ACCESS read-only STATUS current DESCRIPTION "WiFi Host Access Point on. Supported by RAy2 only." ::= { alarm 12 } -- interface mib ifRadio OBJECT IDENTIFIER ::= {interface 1} ifEth OBJECT IDENTIFIER ::= {interface 2} -- radio mib rxChannel OBJECT-TYPE SYNTAX DisplayStringRaw (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Receiver channel ID." ::= { ifRadio 1 } txChannel OBJECT-TYPE SYNTAX DisplayStringRaw (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver channel ID." ::= { ifRadio 2 } rxFreq OBJECT-TYPE SYNTAX Gauge32 UNITS "kHz" MAX-ACCESS read-only STATUS current DESCRIPTION "Receiver frequency in kHz." ::= { ifRadio 3 } txFreq OBJECT-TYPE SYNTAX Gauge32 UNITS "kHz" MAX-ACCESS read-only STATUS current DESCRIPTION "Transceiver frequency in kHz." ::= { ifRadio 4 } rxModulation OBJECT-TYPE SYNTAX DisplayStringRaw MAX-ACCESS read-only STATUS current DESCRIPTION "Rx modulation text ID." ::= { ifRadio 5 } txModulation OBJECT-TYPE SYNTAX DisplayStringRaw MAX-ACCESS read-only STATUS current DESCRIPTION "Tx modulation text ID." ::= { ifRadio 6 } rxModulationIndex OBJECT-TYPE SYNTAX ModulationList MAX-ACCESS read-only STATUS current DESCRIPTION "Rx modulation index." ::= { ifRadio 7 } txModulationIndex OBJECT-TYPE SYNTAX ModulationList MAX-ACCESS read-only STATUS current DESCRIPTION "Tx modulation index." ::= { ifRadio 8 } bandwidth OBJECT-TYPE SYNTAX INTEGER { na (0), bw-28MHz (1), bw-14MHz (2), bw-7MHz (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Radio channel bandwidth. Supported by RAy10 only." ::= { ifRadio 9 } coding OBJECT-TYPE SYNTAX INTEGER { na (0), low (1), hi (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Channel coding level. Supported by RAy10 only." ::= { ifRadio 10 } matching OBJECT-TYPE SYNTAX OptionSetting MAX-ACCESS read-only STATUS current DESCRIPTION "Channel matching." ::= { ifRadio 11 } rfPowerConfigured OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Configured RF Power in dBm." ::= { ifRadio 12 } netBitrate OBJECT-TYPE SYNTAX Integer32 UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Current net bitrate in kbps." ::= { ifRadio 13 } maxNetBitrate OBJECT-TYPE SYNTAX Integer32 UNITS "Mbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum net bitrate in Mbps." ::= { ifRadio 14 } bandwidthKHz OBJECT-TYPE SYNTAX Integer32 UNITS "kHz" MAX-ACCESS read-only STATUS current DESCRIPTION "Radio channel bandwidth in kHz. Not supported by RAy10." ::= { ifRadio 15 } channelArrangement OBJECT-TYPE SYNTAX INTEGER { na (0), accp (1), acap (2), ccdp (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Channel arrangement. Not supported by RAy10." ::= { ifRadio 16 } rfPowerCurrent OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Current RF Power in dBm. Not supported by RAy10." ::= { ifRadio 17 } acm OBJECT-TYPE SYNTAX OptionSetting MAX-ACCESS read-only STATUS current DESCRIPTION "ACM option. Supported by RAy2 only." ::= { ifRadio 18 } atpc OBJECT-TYPE SYNTAX OptionSetting MAX-ACCESS read-only STATUS current DESCRIPTION "ATPC option. Supported by RAy2 only." ::= { ifRadio 19 } frequencyTable OBJECT-TYPE SYNTAX DisplayStringRaw (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Current frequency table name. Supported by RAy2 only." ::= { ifRadio 20 } -- ifEth mib ifEthTable OBJECT-TYPE SYNTAX SEQUENCE OF IfEthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of Ethernet interfaces." ::= { ifEth 1 } ifEthEntry OBJECT-TYPE SYNTAX IfEthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet interface entry." INDEX { speed } ::= { ifEthTable 1 } IfEthEntry ::= SEQUENCE { speed Integer32, duplex INTEGER, mdix INTEGER, autonego OptionSetting, pause OptionSetting, asymPause OptionSetting } speed OBJECT-TYPE SYNTAX Integer32 (1..1000000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet speed." ::= { ifEthEntry 1 } duplex OBJECT-TYPE SYNTAX INTEGER { na (0), full (1), half (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet duplex." ::= { ifEthEntry 2 } mdix OBJECT-TYPE SYNTAX INTEGER { na (0), mdi (1), mdi-x (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet MDI-X / MDI." ::= { ifEthEntry 3 } autonego OBJECT-TYPE SYNTAX OptionSetting MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet autonego." ::= { ifEthEntry 4 } pause OBJECT-TYPE SYNTAX OptionSetting MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet pause." ::= { ifEthEntry 5 } asymPause OBJECT-TYPE SYNTAX OptionSetting MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet asymmetric pause." ::= { ifEthEntry 6 } prioritized OBJECT-TYPE SYNTAX OptionSetting MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet prioritized VLAN support. Supported by RAy10 only." ::= { ifEth 2 } vlanId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet prioritized VLAN ID. Supported by RAy10 only." ::= { ifEth 3 } serviceVlanId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet service VLAN ID between local and remote station. Not supported by RAy2." ::= { ifEth 4 } -- statistic mib modemR OBJECT IDENTIFIER ::= {statistic 1} radio OBJECT IDENTIFIER ::= {statistic 2} ethernet OBJECT IDENTIFIER ::= {statistic 3} -- statistic radiomodem ethernet mib rxPauseFrames OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received Control frames with a valid PAUSE op-code. Supported by RAy10 only." ::= { modemR 1 } rxControlFrames OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received Control frames. Supported by RAy10 only." ::= { modemR 2 } rxBroadcast OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received packets with a broadcast destination address. Supported by RAy10 only." ::= { modemR 3 } rxMulticast OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received packets with a multicast destination address. Supported by RAy10 only." ::= { modemR 4 } rxDones OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of successfully received packets. Supported by RAy10 only." ::= { modemR 5 } rxOutOfRangeErrors OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received frames larger than 1518 bytes (the frame Type/Length field is indicating a value larger than 1518 bytes). Supported by RAy10 only." ::= { modemR 6 } rxCrcErrors OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received frames with the CRC which does not match the internally generated CRC. Supported by RAy10 only." ::= { modemR 7 } rxCodeErrors OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received packets with one or more erroneous nibbles. Supported by RAy10 only." ::= { modemR 8 } rxFalseCarrierErrors OBJECT-TYPE SYNTAX Counter32 UNITS "errors" MAX-ACCESS read-only STATUS current DESCRIPTION "Rx false carrier errors. Supported by RAy10 only." ::= { modemR 9 } rxDroppedPkts OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of dropped packets. Supported by RAy10 only." ::= { modemR 10 } rxHCBytes OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received bytes. Supported by RAy10 only." ::= { modemR 11 } txPauseFrames OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transmitted Control frames with a valid PAUSE op-code. Supported by RAy10 only." ::= { modemR 12 } txControlFrames OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transmitted Control frames. Supported by RAy10 only." ::= { modemR 13 } txBroadcast OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transmitted packets with a broadcast destination address. Supported by RAy10 only." ::= { modemR 14 } txMulticast OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transmitted packets with a multicast destination address. Supported by RAy10 only." ::= { modemR 15 } txDones OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of successfully transmitted packets. Supported by RAy10 only." ::= { modemR 16 } txLengthCheckErrors OBJECT-TYPE SYNTAX Counter32 UNITS "packets" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transmitted packets with the frame Length field (not a Type field) value that does not match the actual data byte length. Supported by RAy10 only." ::= { modemR 17 } txCrcErrors OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transmitted frames with the CRC which does not match the internally generated CRC. Supported by RAy10 only." ::= { modemR 18 } txCollisions OBJECT-TYPE SYNTAX Counter32 UNITS "collisions" MAX-ACCESS read-only STATUS current DESCRIPTION "Tx collisions. Supported by RAy10 only." ::= { modemR 19 } txHCBytes OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transmitted bytes. Supported by RAy10 only." ::= { modemR 20 } -- statistic radio mib rss OBJECT-TYPE SYNTAX Tenths (-1000..-150) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Receiving RSS indicator in tenths of dBm." ::= { radio 1 } snr OBJECT-TYPE SYNTAX Tenths (0..1000) UNITS "dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Receiving SNR indicator in tenths of dB." ::= { radio 2 } fecBlockCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total block counter for BER calculation. Block size is 2048 bits. Supported by RAy10 only." ::= { radio 3 } fecUncorrectBlockCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Incorrect block counter for BER calculation. Block size is 2048 bits. Supported by RAy10 only." ::= { radio 4 } timeAllConnect OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Overall link uptime." ::= { radio 5 } timeAllDisconnect OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Overall link downtime." ::= { radio 6 } timeMaxDisconnect OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The longest drop (disconnecting)." ::= { radio 7 } numDisconnect OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of drops (disconnecting)." ::= { radio 8 } reliability OBJECT-TYPE SYNTAX Thousandths (0..100000) UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "Reliability in thousandths of %." ::= { radio 9 } linkUptime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Current radio link uptime. Not supported by RAy10." ::= { radio 10 } ber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bit Error Rate (BER) multiplied by 10^9. Not supported by RAy10." ::= { radio 11 } -- statistic Ethernet mib ethInThroughput OBJECT-TYPE SYNTAX Integer32 UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Input Ethernet 1 data port throughput in kbps. Not supported by RAy10." ::= { ethernet 1 } ethOutThroughput OBJECT-TYPE SYNTAX Integer32 UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Output Ethernet 1 data port throughput in kbps. Not supported by RAy10." ::= { ethernet 2 } eth2InThroughput OBJECT-TYPE SYNTAX Integer32 UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Input Ethernet 2 data port throughput in kbps. Supported by RAy2 only." ::= { ethernet 3 } eth2OutThroughput OBJECT-TYPE SYNTAX Integer32 UNITS "kbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Output Ethernet 2 data port throughput in kbps. Supported by RAy2 only." ::= { ethernet 4 } -- switch mib egressQueue OBJECT IDENTIFIER ::= { switch 3 } -- switch egress mib speedGuard OBJECT-TYPE SYNTAX OptionSetting MAX-ACCESS read-only STATUS current DESCRIPTION "Speed guard feature on/off. Supported by RAy2 only." ::= { egressQueue 2 } -- definition traps rayTrapsPrefix OBJECT IDENTIFIER ::= { rayTraps 0 } airDisconnect NOTIFICATION-TYPE OBJECTS { lineStatus } STATUS current DESCRIPTION "Air line disconnected. Not supported by RAy2." ::= { rayTrapsPrefix 1 } airConnect NOTIFICATION-TYPE OBJECTS { lineStatus } STATUS current DESCRIPTION "Air line connected after being disconnected. Not supported by RAy2." ::= { rayTrapsPrefix 2 } airWdog NOTIFICATION-TYPE OBJECTS { lineStatus } STATUS current DESCRIPTION "Air watch dog. Supported by RAy10 only." ::= { rayTrapsPrefix 3 } tempAlarm NOTIFICATION-TYPE OBJECTS { temperatureModem } STATUS current DESCRIPTION "Temperature exceeded the threshold. Not supported by RAy2." ::= { rayTrapsPrefix 4 } powerAlarm NOTIFICATION-TYPE OBJECTS { voltageUnit } STATUS current DESCRIPTION "Power voltage is out of the thresholds. Not supported by RAy2." ::= { rayTrapsPrefix 5 } memoryAlarm NOTIFICATION-TYPE OBJECTS { useMemory } STATUS current DESCRIPTION "Memory use exceeded the threshold. Supported by RAy10 only." ::= { rayTrapsPrefix 6 } rssAlarm NOTIFICATION-TYPE OBJECTS { rss } STATUS current DESCRIPTION "RSS exceeded the threshold. Not supported by RAy2." ::= { rayTrapsPrefix 7 } snrAlarm NOTIFICATION-TYPE OBJECTS { snr } STATUS current DESCRIPTION "SNR exceeded the threshold. Not supported by RAy2." ::= { rayTrapsPrefix 8 } berAlarm NOTIFICATION-TYPE OBJECTS { fecUncorrectBlockCounter, fecBlockCounter } STATUS current DESCRIPTION "BER exceeded the threshold. Not supported by RAy2." ::= { rayTrapsPrefix 9 } rfPowerFail NOTIFICATION-TYPE OBJECTS { rfPowerStatus } STATUS current DESCRIPTION "RF Power amplifier failure. Not supported." ::= { rayTrapsPrefix 10 } peerEthLinkDown NOTIFICATION-TYPE OBJECTS { ethPeer } STATUS current DESCRIPTION "Peer station Ethernet link Up/Down. Not supported by RAy2." ::= { rayTrapsPrefix 11 } -- RAy2 trap definitions ray2TrapsPrefix OBJECT IDENTIFIER ::= { ray2Traps 0 } tr2TemperatureAlarm NOTIFICATION-TYPE OBJECTS { temperatureModem, alarmTemperature } STATUS current DESCRIPTION "Temperature exceeded the threshold. Supported by RAy2 only." ::= { ray2TrapsPrefix 1 } tr2VoltageLowAlarm NOTIFICATION-TYPE OBJECTS { voltageUnit, alarmVoltageLow } STATUS current DESCRIPTION "Supply voltage below minimal threshold. Supported by RAy2 only." ::= { ray2TrapsPrefix 2 } tr2VoltageHighAlarm NOTIFICATION-TYPE OBJECTS { voltageUnit, alarmVoltageHigh } STATUS current DESCRIPTION "Supply voltage above maximal threshold. Supported by RAy2 only." ::= { ray2TrapsPrefix 3 } tr2RssAlarm NOTIFICATION-TYPE OBJECTS { rss, alarmRss } STATUS current DESCRIPTION "RSS exceeded the threshold. Supported by RAy2 only." ::= { ray2TrapsPrefix 4 } tr2SnrAlarm NOTIFICATION-TYPE OBJECTS { snr, alarmSnr } STATUS current DESCRIPTION "SNR exceeded the threshold. Supported by RAy2 only." ::= { ray2TrapsPrefix 5 } tr2BerAlarm NOTIFICATION-TYPE OBJECTS { ber, alarmBer } STATUS current DESCRIPTION "BER exceeded the threshold. Supported by RAy2 only." ::= { ray2TrapsPrefix 6 } tr2AirDisconnect NOTIFICATION-TYPE OBJECTS { lineStatusII, alarmPeerDisconnected } STATUS current DESCRIPTION "Air line disconnected. Supported by RAy2 only." ::= { ray2TrapsPrefix 7 } tr2AirConnect NOTIFICATION-TYPE OBJECTS { lineStatusII, alarmPeerDisconnected } STATUS current DESCRIPTION "Air line connected after being disconnected. Supported by RAy2 (up to fw 2.1.7.0) only." ::= { ray2TrapsPrefix 8 } tr2Eth1LinkDown NOTIFICATION-TYPE OBJECTS { eth1Link, alarmEth1Down } STATUS current DESCRIPTION "Local station Ethernet 1 link Up/Down. Supported by RAy2 only." ::= { ray2TrapsPrefix 9 } tr2Eth21LinkDown NOTIFICATION-TYPE OBJECTS { eth2Link, alarmEth2Down } STATUS current DESCRIPTION "Local station Ethernet 2 link Up/Down. Supported by RAy2 only." ::= { ray2TrapsPrefix 10 } tr2RfPowerFail NOTIFICATION-TYPE OBJECTS { rfPowerStatus, alarmRfPowerFail } STATUS current DESCRIPTION "RF Power amplifier failure. Supported by RAy2 only." ::= { ray2TrapsPrefix 11 } tr2NetBitrate NOTIFICATION-TYPE OBJECTS { netBitrate, alarmNetBitrate } STATUS current DESCRIPTION "Air speed below threshold. Supported by RAy2 only." ::= { ray2TrapsPrefix 12 } tr2WifiOn NOTIFICATION-TYPE OBJECTS { wifiHAP, alarmWifiOn } STATUS current DESCRIPTION "WiFi Host Access Point is on. Supported by RAy2 only." ::= { ray2TrapsPrefix 13 } tr2AirCapacity NOTIFICATION-TYPE OBJECTS { netBitrate } STATUS current DESCRIPTION "Event - Air Capacity changed. Supported by RAy2 only." ::= { ray2TrapsPrefix 101 } END