https//www.racom.eu/eng/products/m/mw160/tech_param.html
Tab. 4.1: Table of technical parameters MW160
| Frequency range | MW160: 135–175 MHz |
| Channel spacing | 200 kHz |
| Means of setting working frequency | software in range +3.2 MHz from base frequency |
| Switching time transmitting/receiving | < 1.5 ms |
| Receiver sensitivity for BER 10-3 | better than -100 dBm |
| Software adjustable output power 1) | 0.1–5 W |
| 0.1–25 W | |
| Max. modulation rate for transmitting | 133 kbit/s in 200 kHz channel |
| Optional modules | |
| slot 5 | ADIO (analog and digital inputs and outputs) |
| slot 4 | Ethernet 10/100 Mbps |
| slot 3 | 2×RS232 |
| slot 2 | RS232 or galv. sep. RS232 or RS422/RS485 |
| slot 1 | |
| Antenna connector | N |
| MTBF(Mean Time Between Failure) | > 500.000 hours (> 50 years) |
| Supply nominal voltage | 13.8 V |
| Supply voltage range | 10.8–15.6 V |
| Idle consumption (Rx) 2) | 420 mA + modules: (Eth. 30 mA, ADIO 50 mA, SCC 5 mA) |
| Transmission consumption (Tx) 2) | 5.5 A / 25 W |
| Consumption in SLEEP mode | 2.5 mA |
| Operating range of temperature | -25 to +55 °C |
| Storage range of temperature | -40 to +85 °C |
| Mechanical dimensions | 208×108×63 mm (71 mm DIN rail including) |
| 184×108×63 mm (short version) | |
| Spacing of fastening holes | 198×65 mm, ø 4.8 mm |
| Weight | 1.3 kg |
1) Availability of specific types and frequencies check here, please.
Presently these types
are under mass production.
2) Approximate values dependent on
frequency and modem type.