Technical parameters

https//www.racom.eu/eng/products/m/wasp/tech.html

6. Technical parameters
Prev		Next

Print version

6. Technical parameters

Tab. 6.1: Technical parameters

Radio parameters		WaSP
Frequency bands		200 – 470 and 700 – 960 MHz
Channel spacing		25; 50; 100; 200; 400; 625; 1 250; 2 500; 5 000; 10 000 kHz
Frequency stability		±0.5 ppm
Modulation		4CPFSK; 2CPFSK
FEC (Forward Error Correction)		3/4; Off Trellis code with Viterbi soft-decoder
Gross data rate (data speed)		up to 8.3 Mb/s

RF Output power		20-35 dBm PEP (0.1-3 W RMS) 1 dB step programmable
Duty cycle		Continuous
Rx to Tx Time		< 0.7 ms @ 25 kHz channel
Sensitivity		-110 dBm (2CPFSK; 200 kHz BER 10^-2; 3/4 FEC) -95 dBm (2CPFSK; 10 MHz BER 10^-2; 3/4 FEC)

Technical parameters are subject to change without prior notification.

Electrical	WaSP
Primary power	10 to 30 VDC, negative GND
Rx	9 W @ 24 V, see details
Tx	10 – 27 W @ 24 V for 200 – 470 MHz; 13 – 35 W @ 24 V for 700-960 MHz
Sleep mode	0.01 W
Interfaces
Ethernet	2× 10/100Base-T Auto MDI/MDIX	2× JST-GH (4 pins)
COM	RS232	1× JST-GH (5 pins)
	600 b/s – 1 Mb/s
USB	USB 2.0	C – connector
Antenna	50 Ω SW configurable 1× Tx / Rx Hi + 1× Rx / Tx Lo	2× MCX @50 Ω
Inputs/Outputs	1× HW alarm input 1× HW alarm output 1× Sleep input	1× JST-GH (5 pins)

Indication LEDs
LED panel		4× tri-color status LEDs (SYS, RX, TX, COM)
ETH		2× ETH (Link and Activity LEDs)
Environmental
IP Code (Ingress Protection)		IP 30
MTBF (Mean Time Between Failure)		> 900 000 hours (> 100 years)
Operating temperature		−40 to +60 °C ( −40 to +140 °F)
Operating humidity		5 to 95 % non-condensing
Storage		−40 to +85 °C ( −40 to +185 °F) / 5 to 95 % non-condensing
Mechanical
Casing		Rugged aluminium
Dimensions H×W×D		var. A: 22×78×154 mm (0.8×3.0×6.0 in) var. B: 31.3×78×154 mm (1.1×3.0×6.0 in)
Weight		var. A: 295 g (0.65 lbs) var. B: 458 g (1.01 lbs)
Mounting		Through hole M4 (only var. A) or to the thread (M5)
SW
User protocols on COM		DNP3, DF1, IEC101, Modbus RTU, PR2000, RDS, Siemens 3964(R), COMLI, SAIA S-bus, Mars-A, PPP, UNI, Async Link
User protocols on Ethernet		Modbus TCP, IEC104, DNP3 TCP, Comli TCP, Terminal server…
Serial to IP convertors		DNP3 / DNP3 TCP, Modbus RTU / Modbus TCP
Routing (both, Radio and Ethernet)		Static, Dynamic – Babel, OSPF, BGP, Link management
QoS		8 levels on all interfaces
Protocol on Radio channel
Radio channel protocols		Transparent, Flexible
Repeaters		Store-and-forward Every unit Unlimited number
Frequency hopping		Interference awareness* – pending
Data integrity control		CRC 32
Security
Management		HTTPS (Web Interface or Application Programming Interface)
Role-based access control (RBAC)		4 levels (Guest, Tech, SecTech, Admin)
Encryption		AES256-CCM
VPN		IPsec, OpenVPN, GRE
VLAN		IEEE 802.1Q (tagging), Q-in-Q for Transparent mode
Firewall		Layer 2 – MAC, Layer 3 – IP, Layer 4 – TCP/UDP
FW		Digitally signed

Diagnostic and Management
Link testing	ICMP ping, RSS ping
Status information	User interfaces
Statistics	Historical and differencial statistics for all interfaces
Event log	Events filtered by time, severity, user, remote IP address and type of event
SNMP	SNMPv1, SNMPv2c, SNMPv3 Trap / Inform alarms generation as per settings
NTP	Client / Server
Monitoring	Real time analysis of all interfaces (RADIO, ETH , COM, TS and internal interfaces between software modules).

Tab. 6.2: List of connected cables

Input / Output	Specified length	Shielded / Nonshielded	Recommended cable type
DC power supply 10 – 30 V	As needed	N	V03VH-H 2×0,5
GPIO (Sleep Input, HW Alarm Input, HW Alarm Output)	As needed	S	LiYCY 6×0,14
Antenna connection	As needed	S	Coaxial
COM (RS232)	As needed, typically up to 15 m (RS232)	S	LiYCY 4×0,14
ETH	As needed, typically up to 100 m	S	STP CAT 5e
USB	Max. 3 m	S	USB3

Standards
CE	RED (pending), RoHS,WEEE, ЕАЭС
Spectrum	ETSI EN 300 220-2 V3.3.1
EMC (electromagnetic compatibility)	ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-5 V3.2.1
Product safety	EN 62368-1:2014 + A11:2017
Cybersecurity	EN 18031-1:2024
RF health safety	EN 62311:2008

Rx Power consumption	WaSP
@24Vdc
WaSP	8.3 W
+Ethernet	+0.1 W @ 10BaseT
	+0.12 W @ 100BaseT
	per Eth interface with connected equipment
COM	+0.2 W

6.1. Detailed radio channel parameters

Tab. 6.3: Channel spacing 25 kHz

Channel spacing [kHz]	25
Occupied BW limit [kHz]	25
Modulation type	FSK
Baudrate [kBaud]	10.42
WaSP Compliance	NA

25 kHz
Modulation rate [kb/s]	Modulation	Emission code	OBW [kHz]	OBW limit [kHz]
10.42	2CPFSK	12K8F1BDN	12.8	25
20.83	4CPFSK	13K7F1DDN	13.7	25

25 kHz
Classification				Sensitivity
Modulation rate [kb/s]	Bitrate [kb/s]	FEC	Modulation	BER 10^-6
10.42	7.81	3/4	2CPFSK	-112
10.42	10.42	1/1	2CPFSK	-111
20.83	15.63	3/4	4CPFSK	-110
20.83	20.83	1/1	4CPFSK	-107

Tab. 6.4: Channel spacing 50 kHz

Channel spacing [kHz]	50
Occupied BW limit [kHz]	50
Modulation type	FSK
Baudrate [kBaud]	20.83
WaSP Compliance	RED

50 kHz
Modulation rate [kb/s]	Modulation	Emission code	OBW [kHz]	OBW limit [kHz]
20.83	2CPFSK	25K6F1BDN	25.6	50
41.67	4CPFSK	29K1F1DDN	29.1	50

50 kHz
Classification				Sensitivity
Modulation rate [kb/s]	Bitrate [kb/s]	FEC	Modulation	BER 10^-6
20.83	15.62	3/4	2CPFSK	-110.1
20.83	20.83	1/1	2CPFSK	-109.2
41.67	31.25	3/4	4CPFSK	-108.1
41.67	41.67	1/1	4CPFSK	-104.9

Tab. 6.5: Channel spacing 100 kHz

Channel spacing [kHz]	100
Occupied BW limit [kHz]	100
Modulation type	FSK
Baudrate [kBaud]	41.67
WaSP Compliance	RED

100 kHz
Modulation rate [kb/s]	Modulation	Emission code	OBW [kHz]	OBW limit [kHz]
41.67	2CPFSK	51K2F1BDN	51.2	100
83.33	4CPFSK	58K2F1DDN	58.2	100

100 kHz
Classification				Sensitivity
Modulation rate [kb/s]	Bitrate [kb/s]	FEC	Modulation	BER 10^-6
41.67	31.25	3/4	2CPFSK	-108.1
41.67	41.67	1/1	2CPFSK	-107.6
83.33	62.5	3/4	4CPFSK	-106.6
83.33	83.33	1/1	4CPFSK	-101.4

Tab. 6.6: Channel spacing 200 kHz

Channel spacing [kHz]	200
Occupied BW limit [kHz]	200
Modulation type	FSK
Baudrate [kBaud]	83.33
WaSP Compliance	RED

200 kHz
Modulation rate [kb/s]	Modulation	Emission code	OBW [kHz]	OBW limit [kHz]
83.33	2CPFSK	103KF1BDN	103	200
166.67	4CPFSK	118KF1DDN	118	200

200 kHz
Classification				Sensitivity
Modulation rate [kb/s]	Bitrate [kb/s]	FEC	Modulation	BER 10^-6
83.33	62.5	3/4	2CPFSK	-106.5
83.33	83.33	1/1	2CPFSK	-105.9
166.67	125	3/4	4CPFSK	-104.9
166.67	166.67	1/1	4CPFSK	-101.4

Tab. 6.7: Channel spacing 400 kHz

Channel spacing [kHz]	400
Occupied BW limit [kHz]	400
Modulation type	FSK
Baudrate [kBaud]	166.67
WaSP Compliance	NA

400 kHz
Modulation rate [kb/s]	Modulation	Emission code	OBW [kHz]	OBW limit [kHz]
166.67	2CPFSK	207KF1BDN	207	400
333.33	4CPFSK	233KF1DDN	233	400

400 kHz
Classification				Sensitivity
Modulation rate [kb/s]	Bitrate [kb/s]	FEC	Modulation	BER 10^-6
166.67	125	3/4	2CPFSK	-103.8
166.67	166.67	1/1	2CPFSK	-103.3
333.33	250	3/4	4CPFSK	-102.8
333.33	333.33	1/1	4CPFSK	-98.8

Tab. 6.8: Channel spacing 625 kHz

Channel spacing [kHz]	625
Occupied BW limit [kHz]	625
Modulation type	FSK
Baudrate [kBaud]	260.417
WaSP Compliance	NA

625 kHz
Modulation rate [kb/s]	Modulation	Emission code	OBW [kHz]	OBW limit [kHz]
260.417	2CPFSK	316KF1BDN	316	625
520.833	4CPFSK	356KF1DDN	356	625

625 kHz
Classification				Sensitivity
Modulation rate [kb/s]	Bitrate [kb/s]	FEC	Modulation	BER 10^-6
260.417	195.31	3/4	2CPFSK	-101
260.417	260.42	1/1	2CPFSK	-100.5
520.833	390.62	3/4	4CPFSK	-100
520.833	520.83	1/1	4CPFSK	-95.1

Tab. 6.9: Channel spacing 1250 kHz

Channel spacing [kHz]	1250
Occupied BW limit [kHz]	1250
Modulation type	FSK
Baudrate [kBaud]	520.833
WaSP Compliance	NA

1250 kHz
Modulation rate [kb/s]	Modulation	Emission code	OBW [kHz]	OBW limit [kHz]
520.833	2CPFSK	637KF1BDN	637	1250
1041.666	4CPFSK	717KF1DDN	717	1250

1250 kHz
Classification				Sensitivity
Modulation rate [kb/s]	Bitrate [kb/s]	FEC	Modulation	BER 10^-6
520.833	390.62	3/4	2CPFSK	-98.5
520.833	520.83	1/1	2CPFSK	-97.5
1041.666	781.25	3/4	4CPFSK	-97
1041.666	1041.67	1/1	4CPFSK	-93.6

Tab. 6.10: Channel spacing 2500 kHz

Channel spacing [kHz]	2500
Occupied BW limit [kHz]	2500
Modulation type	FSK
Baudrate [kBaud]	1041.666
WaSP Compliance	NA

2500 kHz
Modulation rate [kb/s]	Modulation	Emission code	OBW [kHz]	OBW limit [kHz]
1041.666	2CPFSK	1M28F1BDN	1280	2500
2083.333	4CPFSK	1M45F1DDN	1450	2500

2500 kHz
Classification				Sensitivity
Modulation rate [kb/s]	Bitrate [kb/s]	FEC	Modulation	BER 10^-6
1041.666	781.25	3/4	2CPFSK	-95.7
1041.666	1041.67	1/1	2CPFSK	-95.2
2083.333	1562.5	3/4	4CPFSK	-94.1
2083.333	2083.33	1/1	4CPFSK	-90.6

Tab. 6.11: Channel spacing 5000 kHz

Channel spacing [kHz]	5000
Occupied BW limit [kHz]	5000
Modulation type	FSK
Baudrate [kBaud]	2083.333
WaSP Compliance	NA

5000 kHz
Modulation rate [kb/s]	Modulation	Emission code	OBW [kHz]	OBW limit [kHz]
2083.333	2CPFSK	2M51F1BDN	2510	5000
4166.666	4CPFSK	2M87F1DDN	2870	5000

5000 kHz
Classification				Sensitivity
Modulation rate [kb/s]	Bitrate [kb/s]	FEC	Modulation	BER 10^-6
2083.333	1562.5	3/4	2CPFSK	-92.5
2083.333	2083.33	1/1	2CPFSK	-92.2
4166.666	3125	3/4	4CPFSK	-90.6
4166.666	4166.67	1/1	4CPFSK	-87.1

Tab. 6.12: Channel spacing 10000 kHz

Channel spacing [kHz]	10000
Occupied BW limit [kHz]	10000
Modulation type	FSK
Baudrate [kBaud]	4166.666
WaSP Compliance	NA

10000 kHz
Modulation rate [kb/s]	Modulation	Emission code	OBW [kHz]	OBW limit [kHz]
4166.666	2CPFSK	4M81F1BDN	4810	10000
8333.332	4CPFSK	5M44F1DDN	5440	10000

10000 kHz
Classification				Sensitivity
Modulation rate [kb/s]	Bitrate [kb/s]	FEC	Modulation	BER 10^-6
4166.666	3125	3/4	2CPFSK	-89.4
4166.666	4166.67	1/1	2CPFSK	-89
8333.332	6250	3/4	4CPFSK	-85.5
8333.332	8333.33	1/1	4CPFSK	-80.4

Prev		Next
5. Diagnostics	Contents	7. Safety, regulations, warranty