Although MG102i wireless routers have been specifically designed for SCADA and telemetry, they are well suited to variety of wireless applications. MG102i HW and SW are ready to maintain reliable and secure connections from an unlimited number of remote locations to a central server. Both standard Ethernet/IP and serial interfaces are available. Moreover, two digital inputs and two digital outputs can be used for direct monitoring and control of application devices.
MG102i versatility is further enhanced by two independent Ethernet ports. These can be configured to either support two independent LANs (e.g. LAN and WAN settings), or simply connect two devices within one LAN (effectively replacing an Eth switch). MG102i software is based on proven components, including an Embedded Linux operating system and standard TCP/IP communication protocols.
Combining MG102i with a M!DGE single-SIM router in one network is quite straightforward because of fully compatible interface settings and behaviour on all HW interfaces.
MG102i and M!DGE cellular routers are from the same product family, shares the same source code and setting of many feautres is identical.
M!DGE/MG102i together with RACOM RipEX radio router offers an unrivaled solution for combining GPRS and UHF/VHF licensed radio in a single network. Even a single RipEX in the center of a MG102i network allows for efficient use of addressed serial SCADA protocols.
Mobile Interface Parameters
Mobile Connection options: HSPA+, HSDPA, HSUPA, UMTS, EDGE, GPRS, GSM and LTE
Global connectivity
Transparent hand-over between 2G and 3G or 2G, 3G and 4G
Power supply
Input voltage: 10.2 – 57.6 VDC
Max. power consumption: 6 W
Services /Networking
Fallback Management
Connection supervision, Automatic connection recovery
Quality of Service (QoS)
OpenVPN, IPsec, PPTP, GRE, Dial-In
VRRP
OSPF, BGP
DHCP server, DNS proxy server, DNS update agent, NTP
Telnet server, SSH server, Web server
Device server, Protocol server, SDK
Port Forwarding (NAPT), Firewall, Access Control Lists
Modbus TCP – Modbus RTU conversion
Interfaces
5 Ethernet ports: LAN, WAN/LAN
RS232
2× DI, 2× DO
USB host
Diagnostic and Management
Web interface, CLI available
File configuration
OTA SW update
Advanced troubleshooting
SMS remote control, SMS and E-mail notification
SNMPv1/v2c/3
| EMC | EN 301 489-1 V1.9.2 |
| EN 301 489-7 V1.3.1 | |
| EN 301 489-17 V2.2.1 | |
| EN 301 489-24 V1.5.1 | |
| EN 300 328 V1.8.1 | |
| EN 300 440-2 V1.4.1 | |
| EN 50 121-3-2:2006 | |
| EN 50 121-4:2006 | |
| EN 55022:2010 | |
| EN 55024:2010 | |
| EN 61 000-6-2:2005 | |
| Radio | EN 301511 V9.0.2 |
| EN 301893 V1.7.1 | |
| Electrical Safety | EN 60950-1 +A11:2006/2009 |
| +A1 +A12:2010/2011 | |
| EN 62311:2008 | |
| IP rating | IP40 |
| ETH | IEEE 802.3i |
| IEEE 802.3u | |
| IEEE 802.3af |