Technical parameters

https//www.racom.eu/eng/products/m/ray3/tech.html

Print version

9. Technical parameters

Tab. 9.1: Parameters 10 GHz

RAy3-10General parameters 
TypeRAy3-10
Radio
Frequency range10.125 – 10.675 GHz
  LowerUpperLowerUpper
 Sub-band A10.301 – 10.42010.476 – 10.588
 Sub-band B3)10.125 – 10.32510.475 – 10.675
 Sub-band notesFree-band in CZGlobal licensed band
Type of duplex trafficFDD (Frequency division duplex)
Speed (each direction)2.9 – 1014 Mb/s, see details
Channel bandwidth

3.5, 7, 14, 28, 56, 84, 112 MHz

3.5, 7, 10, 14, 20, 28, 56, 112 MHz
Duplex spacing

flexible, min. 58 MHz, typ. 168 MHz, max. 285 MHz

350 MHz

ModulationsQPSK, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 512QAM, 1024QAM, 2048QAM, 4096QAM
ACMHitless – through all modulations including stronger FEC 1)
Asymmetry of TX/RX speedsYes (all combinations of available Bandwidths & Modulations supported)
FECLDPC
Sensitivity, BER 10-6

-100.5 dBm (4.2 Mb/s); -50.5 dBm (1014 Mb/s), see details

Receiver dynamics (RSS range)-100 to -30 dBm
Precision of RSS measurement±2 dB
RF Output Power

-15 to +13 dBm (QPSK)
-15 to +10 dBm (QAM modulations)

-15 to +15 dBm (preliminary)
Precision of RF Output power setting±1 dB
ATPCYes (range up to 30 dB)
Noise figure3 dB (typ.)
Ethernet (user data & management)
RJ45

1 Gb Eth. 10/100/1000BASE-T Auto MDI/MDIX

SFP
(user exchangeable)

2.5 Gb Eth. SFP slot 10/100/1000/2500BASE-T; 1000BASE-SX; 1000BASE-LX (power max. 1.3 W)

Throughput L2 (RFC 2544)Up to 987 Mb/s (similar to 17/24 GHz speeds)
Latency L2 (RFC 2544, one way)

150 μs (66 B / 352 Mb/s); <200 μs (1518 B / 352 Mb/s);
<100 μs (66 B / 1010 Mb/s); <150 μs (1518 B / 1010 Mb/s)

MTU (max. packet length)10240 Bytes
SynchronizationSynchronous Ethernet; PTP (IEEE-1588v2 transparent clock)
Electrical
Primary powerPoE active IEEE 802.3bt (POE++)
PoE passive 20 – 60 VDC
DC 20 – 60 VDC
floating
Power consumption (typ.)26.5 W
max. 28 W (with SFP)
System interfaces
USBUSB 2.0, Host A; USB / WiFi; USB / ETH
WiFiMini WiFi 2.4 GHz b/g/n in USB slot (only for Alignment, Management & Diagnostics) – included in basic configuration
EthernetUSB/Eth adapter in USB slot (only for Alignment, Management & Diagnostics) – optional
RSS voltageTwo contact sockets
Indication LEDSystem status (multicolor)
System buttonDefault settings, Configuration restore from internal backup
Environmental
Ingress ProtectionIP66
MTBF (Mean Time Between Failure)> 1.000.000 hours (> 114 years)
Operating temperature– 30 to + 55 °C (ETSI EN 300019-1-4, class 4.1.)
Operating humidity15 – 100 %
Storage humidity5 – 95 % non-condensing
Surge immunity4 kV (EN 61000-4-5)
ESD resistance8 kV (EN 61000-4-2)
Mechanical
Design & MountingFOD (Full Outdoor), direct mounting to antenna
Unit typesSpecific units for each Sub-band and for Lower (L) and Upper (U) part of the band
CasingRugged die-cast aluminum, compatible with RAy1 and RAy2
SizeH×W×D: 160×245×245 mm (6.3×9.6×9.6 in)
Weight2.8 kg (6.2 lbs)
AntennaClass 3, 0.3 – 1.8 m, direct mounting (Jirous or LEAX/Arkivator or Shenglu or others)
Diagnostics & Monitoring
Real time monitoringRSS, MSE, BER
Diagnostic toolsSpectrum analyzer, Pinger
History chartsTemperature, Power voltage, RSS, MSE, BER, Data rate, RF Output power
StatisticsRMON counters for all interfaces
Antenna alignmentRSS voltage, Smartphone app (RAyTools), Web
SNMPSNMP v2c including configurable TRAPs
Security
ManagementWeb (HTTP, HTTPS), CLI (SSH, Telnet), Smartphone app (RAyTools)
Access accounts3 levels (Guest, Admin, Super)
WiFipassphrase; HW/SW enable/disable; active only during air-link loss
EncryptionAES 128, 192, 256 2)
Standards
ApprovalsCE (RED), RoHSCE (RED), RoHS
SpectrumEN 302 2017 V3.1.1
EMC

EN 301 489-1 V2.2.3
EN 301 489-3 V2.1.1
EN 301 489-4 V3.3.1

SafetyEN 62368-1:2020 + A11:2020
FCC
IC

1) Stability optimized (stronger) FEC
2) Encryption is prohibited in Variant ‘N’
       

Tab. 9.2: Parameters 11/18 GHz (11 GHz preliminary)

RAy3-11/18General parameters (11 GHz preliminary) 
TypeRAy3-11RAy3-18
Radio
Frequency range10.7 – 11.7 GHz17.700 – 19.700 GHz
  LowerUpperLowerUpper
 Sub-band A10.700 – 10.98911.199 – 11.49117.700 – 18.20918.710 – 19.219
 Sub-band B10.905 – 11.19511.395 – 11.70018.167 – 18.69019.177 – 19.700
 Sub-band C17.700 – 18.30019.300 – 19.700
Type of duplex trafficFDD (Frequency division duplex)
Speed (each direction)2.9 – 2028 Mb/s4.2 – 1014 Mb/s, see details; 4.2 – 2028 3) Mb/s,
Channel bandwidth3.5, 7, 14, 20, 28, 40, 56, 80, 112 MHz

Sub-bands A, B (ETSI): 5, 7, 7.5, 13.75, 27.5, 55, 110 MHz;
Sub-band C (FCC): 5, 10, 20, 30, 40, 50, 60, 80, 100, 110 MHz

Dual Channelup to 2× 112 MHz

up to 2× 110 MHz 3)

Duplex spacingtyp. 490 MHz (ETSI) or 530 MHz (rest of the world)

Sub-bands A, B (ETSI): 1008, 1010 MHz;
Sub-band C (FCC): 1560 MHz

ModulationsQPSK, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 512QAM, 1024QAM, 2048QAM, 4096QAM
ACMHitless – through all modulations including stronger FEC 1)
Asymmetry of TX/RX speedsYes (all combinations of available Bandwidths 3) & Modulations supported)
FECLDPC
Sensitivity, BER 10-6

expected same as RAy3-18

-100.5 dBm (4.2 Mb/s)
-49.5 dBm (1010 Mb/s)
see details

Receiver dynamics (RSS range)-100 to -30 dBm
Precision of RSS measurement±2 dB
RF Output Power-1 to +23 dBm
Precision of RF Output power setting±1 dB
ATPCYes (range 24 dB)
Noise figure3 dB (typ.)
Ethernet (user data & management)
RJ45

1 Gb Eth. 10/100/1000BASE-T Auto MDI/MDIX

SFP
(user exchangeable)

2.5 Gb Eth. SFP slot 10/100/1000/2500BASE-T; 1000BASE-SX; 1000BASE-LX (power max. 1.3 W)

Throughput L2 (RFC 2544)Up to 987 Mb/s @ 1× 1Gb Eth. interface (similar to 17/24 GHz speeds); with Dual Channel up to 2 Gb/s @ 2.5 Gb Eth. interface or 2× 1Gb Eth. interface
Latency L2 (RFC 2544, one way)

150 μs (66 B / 352 Mb/s); <200 μs (1518 B / 352 Mb/s);
<100 μs (66 B / 1014 Mb/s); <150 μs (1518 B / 1014 Mb/s)

MTU (max. packet length)10240 Bytes
SynchronizationSynchronous Ethernet; PTP (IEEE-1588v2 transparent clock)
Electrical
Primary powerPoE active IEEE 802.3bt (POE++)
PoE passive 37 – 60 VDC
DC 37 – 60 VDC
floating
Power consumption (typ.)expected same as RAy3-1830 W for TX ≤ +17 dBm
up to 33 W for TX = +23 dBm
max. 35 W (with SFP)
System interfaces
USBUSB 2.0, Host A; USB / WiFi; USB / ETH
WiFiMini WiFi 2.4 GHz b/g/n in USB slot (only for Alignment, Management & Diagnostics) – included in basic configuration
EthernetUSB/Eth adapter in USB slot (only for Alignment, Management & Diagnostics) – optional
RSS voltageTwo contact sockets
Indication LEDSystem status (multicolor)
System buttonDefault settings, Configuration restore from internal backup
Environmental
Ingress ProtectionIP66
MTBF (Mean Time Between Failure)> 1.000.000 hours (> 114 years)
Operating temperature– 30 to + 55 °C (ETSI EN 300019-1-4, class 4.1.)
Operating humidity15 – 100 %
Storage humidity5 – 95 % non-condensing
Surge immunity4 kV (EN 61000-4-5)
ESD resistance8 kV (EN 61000-4-2)
Mechanical
Design & MountingFOD (Full Outdoor), direct mounting to antenna
Unit typesSpecific units for each Sub-band and for Lower (L) and Upper (U) part of the band
CasingRugged die-cast aluminum, compatible with RAy1 and RAy2
SizeH×W×D: 160×245×245 mm (6.3×9.6×9.6 in)
Weight2.9 kg (6.4 lbs)
AntennaClass 3, 0.3 – 1.8 m, direct mounting (Jirous or LEAX/Arkivator or Shenglu or others)
Diagnostics & Monitoring
Real time monitoringRSS, MSE, BER
Diagnostic toolsSpectrum analyzer, Pinger
History chartsTemperature, Power voltage, RSS, MSE, BER, Data rate, RF Output power
StatisticsRMON counters for all interfaces
Antenna alignmentRSS voltage, Smartphone app (RAyTools), Web
SNMPSNMP v2c including configurable TRAPs
Security
ManagementWeb (HTTP, HTTPS), CLI (SSH, Telnet), Smartphone app (RAyTools)
Access accounts3 levels (Guest, Admin, Super)
WiFipassphrase; HW/SW enable/disable; active only during air-link loss
EncryptionAES 128, 192, 256 2)
Standards
ApprovalsCE (RED) 3), RoHS, FCC 3), IC 3)CE (RED), RoHS, FCC, IC
SpectrumEN 302 2017 V3.1.1
EMC

EN 301 489-1 V2.2.3
EN 301 489-3 V2.1.1
EN 301 489-4 V3.3.1

SafetyEN 62368-1:2020 + A11:2020
FCCFCC part 101FCC part 101
IC compliant

1) Stability optimized (stronger) FEC
2) Encryption is prohibited in Variant ‘N’
3) Pending
 

Tab. 9.3: Parameters 17/24 GHz

RAy3-17/24General parameters 
TypeRAy3-17RAy3-24
Radio
Frequency range17.10 – 17.30 GHz24.00 – 24.25 GHz
Type of duplex trafficFDD (Frequency division duplex)
Speed (each direction)2.6 – 1012 Mb/s, see details
Channel bandwidth3.5, 5, 7, 10, 14, 20, 28, 40, 56, 80, 100, 112 MHz
Duplex spacingFlexible, min. 24 MHz between channel edges
or 18 MHz in case of 2× 112 MHz Channel
ModulationsQPSK, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 512QAM, 1024QAM, 2048QAM, 4096QAM
ACMHitless – through all modulations including stronger FEC 1)
Asymmetry of TX/RX speedsYes (all combinations of Bandwidths & Modulations supported)
FECLDPC, RS
Sensitivity, BER 10-6-100.5 dBm (2.6 Mb/s)
-54.0 dBm (1012 Mb/s)
see details
Receiver dynamics (RSS range)-100 to -30 dBm
Precision of RSS measurement±2 dB
RF Output Power-30 to +10 dBm-30 to +10 dBm
(-30 to -15 dBm) 2)
Precision of RF Output power setting±1 dB
ATPCYes (range 40 dB)
Noise figure3 dB (typ.)
Ethernet (user data & management)
RJ45

1 Gb Eth. 10/100/1000BASE-T Auto MDI/MDIX

SFP
(user exchangeable)

2.5 Gb Eth. SFP slot 10/100/1000/2500BASE-T; 1000BASE-SX; 1000BASE-LX (power max. 1.3 W)

Throughput L2 (RFC 2544)Up to 987 Mb/s, see details
Latency L2 (RFC 2544, one way)

268 µs (64 B, 366 Mb/s); 313 µs (1518 B, 366 Mb/s);
173 µs (64 B, 1002 Mb/s); 198 µs (1518 B, 1002 Mb/s)

MTU (max. packet length) 10240 Bytes 3)
SynchronizationSynchronous Ethernet; PTP (IEEE-1588v2 transparent clock)
Electrical
Primary powerPoE active IEEE 802.3at (POE+)
PoE passive 20 – 60 VDC
DC 20 – 60 VDC
floating
Power consumption (typ.)22.5 W
max. 25 W (with SFP)
System interfaces
USBUSB 2.0, Host A; USB / WiFi; USB / ETH
WiFiMini WiFi 2.4 GHz b/g/n in USB slot (only for Alignment, Management & Diagnostics) – included in basic configuration
EthernetUSB/Eth adapter in USB slot (only for Alignment, Management & Diagnostics) – optional
RSS voltageTwo contact sockets
Indication LEDSystem status (multicolor)
System buttonDefault settings, Configuration restore from internal backup
Environmental
Ingress ProtectionIP66
MTBF (Mean Time Between Failure)> 1.000.000 hours (> 114 years)
Operating temperature– 30 to + 55 °C (ETSI EN 300019-1-4, class 4.1.)
Operating humidity15 – 100 %
Storage humidity5 – 95 % non-condensing
Surge immunity4 kV (EN 61000-4-5)
ESD resistance8 kV (EN 61000-4-2)
Mechanical
Design & MountingFOD (Full Outdoor), direct mounting to antenna
Unit typesOne universal unit for Lower (L) and Upper (U) part of the band
CasingRugged die-cast aluminum, compatible with RAy1 and RAy2
SizeH×W×D: 160×245×245 mm (6.3×9.6×9.6 in)
Weight2.6 kg (5.7 lbs)
AntennaClass 3, 0.3 – 1.8 m, direct mounting (Jirous or LEAX/Arkivator or Shenglu or others)
Diagnostics & Monitoring
Real time monitoringRSS, MSE, BER
Diagnostic toolsSpectrum analyzer, Pinger, Radio loopback
History chartsTemperature, Power voltage, RSS, MSE, BER, Data rate, RF Output power
StatisticsRMON counters for all interfaces
Antenna alignmentRSS voltage, Smartphone app (RAyTools), Web
SNMPSNMP v2c including configurable TRAPs
Security
ManagementWeb (HTTP, HTTPS), CLI (SSH, Telnet), Smartphone app (RAyTools)
Access accounts3 levels (Guest, Admin, Super)
WiFipassphrase; HW/SW enable/disable; active only during air-link loss
EncryptionAES 128, 192, 256 4)
Standards
ApprovalsCE (RED), RoHSCE (RED), FCC, IC, RoHS
SpectrumEN 300 440 V2.2.1
EMC

EN 301 489-1 V2.1.1
EN 301 489-3 V1.6.1
EN 301 489-4 V3.1.1

SafetyEN 62368-1:2014 + A1:2017
FCCCFR 47 part 15 (SQT-RAY3-24)
IC24993-RAY324

1) Stability optimized (stronger) FEC
2) RF Output power -30 to -15 dBm for all models with variant “R” (e.g. RAy3-24R or RAy3-24NR)
3) Model RAy3-24S (produced December 2018 till April 2019) has MTU 2048 bytes. All other models have MTU 10240 bytes.
4) Encryption is possible only with model variants ‘X, ‘S’ and ‘E’. Variants ‘S’ and ‘X’ means the unit is equipped with HW encryption support. Variants ‘E’, ‘S’ and ‘X’ allow SW encryption, while encryption is prohibited in Variant ‘N’.

Tab. 9.4: Parameters 80 GHz

RAy3-80General parameters 
TypeRAy3-80
Radio
Frequency range71 – 86 GHz (E-band)
 Lower (unit L)Upper (unit U)
  71.000 – 76.000 GHz81.000 – 86.000 GHz
Type of duplex trafficFDD (Frequency division duplex)
Speed (each direction)up to 10 Gb/s, see details
Channel bandwidth62.5 2), 125 2), 250, 500, 750, 1000, 1250, 1500, 1750, 2000 MHz
Duplex spacingflexible; typ. 10 GHz, min. 5 GHz, max. 15 GHz
Modulations

2PSK, 4PSK, 8PSK, 16QAM, 32QAM, 64QAM, 128QAM

ACMBHitless – including bandwidth reduction to 1/2 or 1/4 and stronger FEC 1) (together with RF Output power regulation increases the system gain by up to 35.5 dB)
Asymmetry of TX/RX speedsYes, only due to different Modulations (Channel bandwidths are always symmetrical)
FECLDPC
Sensitivity, BER 10-6

-85 dBm (25 Mb/s)
-76 dBm (0.2 Gb/s)
-68 dBm (1 Gb/s)

-59 dBm (4 Gb/s)
-53 dBm (7 Gb/s)
-46.5 dBm (10 Gb/s)
see details
Receiver dynamics (RSS range)-100 to -30 dBm
Precision of RSS measurement±2 dB
RF Output Power-6 to +20 dBm (+17 dBm @ 32QAM; +16 dBm @ 64QAM; +14 dBm @ 128QAM)
Precision of RF Output power setting±1 dB
ATPCYes (range 26 dB)
Noise figure3 dB (typ.)
Ethernet (user data & management)
RJ45

1 Gb Eth. 10/100/1000BASE-T Auto MDI/MDIX

SFP
(user exchangeable)

10 Gb Eth. SFP+ slot for 1000/10000 BASE-SX; 1000/10000 BASE-LX; 1000/2500/5000/10000 BASE-T (power max. 3 W)

Throughput L1 (RFC 2544)10000 Mb/s (64-128 B frames); 9512 Mb/s (1518 B frames), see details
Latency L1 @ 10 Gb/s (RFC 2544, one way)

12.9 μs (64 B frames); 23.5 μs (1518 B frames)

Latency L2 @ 10 Gb/s (RFC 2544, one way)

MTU (max. packet length)10240 Bytes
SynchronizationSynchronous Ethernet 3); PTP (IEEE-1588v2 transparent clock)
Electrical
Primary power

PoE active IEEE 802.3bt (POE++)
PoE passive 37 – 60 VDC
DC 37 – 60 VDC
floating

Power consumption (typ.)

35 W @ channel ≤ 500 MHz
37 W @ channel 1000 MHz
42 W @ for channel 2000 MHz
max. 45 W (with SFP+)

System interfaces
USBUSB 2.0, Host A; USB / WiFi; USB / ETH
WiFiMini WiFi 2.4 GHz b/g/n in USB slot, (only for Alignment, Management & Diagnostics) – included in basic configuration
EthernetUSB/Eth adapter in USB slot (only for Alignment, Management & Diagnostics) – optional
RSS voltageTwo contact sockets
Indication LEDSystem status (multicolor)
System buttonDefault settings, Configuration restore from internal backup
Environmental
Ingress ProtectionIP66
MTBF (Mean Time Between Failure)> 1.000.000 hours (> 114 years) projected
Operating temperature– 30 to + 55 °C (ETSI EN 300019-1-4, class 4.1.)
Operating humidity15 – 100 %
Storage humidity5 – 95 % non-condensing
Surge immunity4 kV (EN 61000-4-5)
ESD resistance8 kV (EN 61000-4-2)
Mechanical
Design & MountingFOD (Full Outdoor), direct mounting to antenna
Unit typesSpecific units for Lower (L) and Upper (U) part of the band
CasingRugged die-cast aluminum
SizeH×W×D: 160×245×245 mm (6.3×9.6×9.6 in)
Weight2.8 kg (6.1 lbs)
AntennasClass 3; 0.20 – 0.68 m; direct mounting (MTI 20cm/41dBi or Jirous 1ft/47 dBi, 2ft/51dBi or LEAX/Arkivator 1ft/47 dBi, 2ft/50dBi or Shenglu 2ft/48dBi or others)
Diagnostics & Monitoring
Real time monitoringRSS, MSE, BER
Diagnostic toolsSpectrum analyzer, Pinger
History chartsTemperature, Power voltage, RSS, MSE, BER, Data rate, RF Output power
StatisticsRMON counters for all interfaces
Antenna alignmentRSS voltage, Smartphone app (RAyTools), Web
SNMPSNMP v2c including configurable TRAPs
Security
ManagementWeb (HTTP, HTTPS), CLI (SSH, Telnet), Smartphone app (RAyTools)
Access accounts3 levels (Guest, Admin, Super)
WiFipassphrase; HW/SW enable/disable; active only during air-link loss
Standards
ApprovalsCE (RED), RoHS, FCC 3), IC 3)
SpectrumEN 302 2017 V3.3.1
EMC

EN 301 489-1 V2.2.3
EN 301 489-3 V2.1.1
EN 301 489-4 V3.3.1

SafetyEN 62368-1:2020 + A11:2020
FCC3)
IC3)

1) Stability optimized (stronger) FEC
2) Quarter or Half Bandwidth (Channel reduced to 1/4 or 1/2)
3) Pending

9.1. RAy3-10 details

9.1.1. RAy3-10 Link speed

Tab. 9.5: Raw link speed 10 GHz (displayed in user interface)

RAy3-10Raw link speed – Bit Rate [Mb/s] 
Channel
[MHz]
 Modulation
QPSK
_S1)
QPSK16
QAM
32
QAM
64
QAM
128
QAM
256
QAM
512
QAM
1024
QAM
2048
QAM
4096
QAM
3.5 2.95.08.712161821242730 
5 4.07.21217222631353842 
7 6.010182532384450556165
10 8.214253444526069778489
14 12213650657688100111122130
20 1729507090106122139155170180
28 244273102130154178201224245262
40 3459102142182214247281314344365
50 4273126175224265306347388425451
56 4984146204261308356403448491525
84 68117203283362427494560624678711
100 85147254354454535619702782850891
112 971672894035176097047978889641014

1) Stability optimized (stronger) FEC 
[Note]Note

Values are equal to Eth L1 throughput @ 2.5 GE SFP port for 1518 B frames according RFC 2544 test (starting with FW 2.0.14.0).

9.1.2. RAy3-10 Radio parameters

Tab. 9.6: Radio parameters 10 GHz, BER = 10-6

RAy3-10Bit Rate [Mb/s] / RSS [dBm] / MSE [dB]2) 
Channel
[MHz]
 Modulation
QPSK
_S1)
QPSK16
QAM
32
QAM
64
QAM
128
QAM
256
QAM
512
QAM
1024
QAM
2048
QAM
4096
QAM
3.5 2.95.08.712.115.618.421.124.127.029.6 
 -99.5-95.5-91.5-88.0-85.0-82.0-79.0-75.5-72.5-68.5 
 -6.0-8.1-13.2-17.4-20.2-23.1-26.1-29.1-32.4-35.2 
5 4.07.212.417.422.426.430.534.638.542.1 
 -100.5-96.5-92.0-87.0-84.0-81.5-78.5-75.5-72.0-68.5 
 -5.8-8.2-13.3-17.5-20.2-23.0-26.1-29.0-32.3-35.1 
7 6.010.418.025.232.338.143.949.855.560.865.0
 -97.0-93.5-89.0-85.0-82.0-79.0-76.0-73.0-70.0-67.0-62.5
 -6.0-8.2-13.3-17.5-20.2-23.1-26.1-29.1-32.3-35.0-38.3
10 8.214.324.834.444.352.160.468.576.684.089.1
 -97.0-93.0-88.0-83.5-80.5-78.0-75.0-72.0-69.0-65.5-61.5
 -5.9-8.2-13.3-17.5-20.3-23.1-26.1-29.1-32.3-35.0-38.3
14 12.120.736.250.464.776.288.199.8111.1121.7130.1
 -94.5-90.5-86.5-82.0-79.0-76.0-73.0-70.0-67.0-64.0-60.0
 -6.0-8.2-13.3-17.5-20.2-23.0-26.1-29.0-32.3-35.0-38.2
20 16.729.050.270.089.7105.8122.3138.7155.2170.0180.5
 -94.0-90.0-85.0-80.5-77.5-75.0-72.0-69.0-66.0-62.5-59.0
 -6.0-8.2-13.3-17.6-20.3-23.0-26.1-29.0-32.3-35.0-38.2
28 24.442.273.0101.7130.4153.8177.7201.2224.0245.4262.3
 -91.5-87.5-83.5-79.0-76.0-73.0-70.0-67.0-64.0-61.0-57.5
 -6.0-8.2-13.3-17.5-20.3-23.1-26.1-29.0-32.3-35.0-38.3
40 34.058.7101.6141.7181.6214.1247.4280.7314.0344.0365.2
 -91.0-87.0-82.0-77.5-74.5-72.0-69.0-66.0-63.0-60.0-56.0
 -5.9-8.2-13.3-17.5-20.3-23.0-26.1-29.0-32.2-35.0-38.2
50 41.972.6125.7175.1224.5264.7305.8346.9388.1425.2451.3
 -90.0-86.0-81.0-76.5-73.5-71.0-68.0-65.0-62.0-59.0-55.0
 -5.9-8.2-13.3-17.6-20.3-23.1-26.2-29.1-32.2-35.0-38.3
56 48.984.4146.1203.6261.0307.7355.5402.5448.1490.9524.7
 -89.0-85.0-80.0-76.0-73.0-70.0-67.0-64.0-61.0-58.0-54.0
 -6.0-8.2-13.3-17.6-20.3-23.1-26.2-29.1-32.2-35.0-38.3
84 67.8117.2202.9282.7362.3427.2493.6559.9623.6677.7711.1
 -87.5-83.5-78.5-73.5-71.0-68.5-65.5-62.5-59.5-56.5-52.5
 -6.0-8.3-13.4-17.7-20.4-23.2-26.3-29.1-32.2-34.8-38.0
100 85.1147.0254.3354.4454.2535.5618.7701.8781.8849.6891.5
 -87.0-83.0-78.0-73.0-70.5-67.5-64.5-61.5-58.5-55.0-51.0
 -6.0-8.3-13.4-17.8-20.5-23.3-26.3-29.1-32.2-34.8-37.9
112 96.9167.3289.4403.2516.9609.4704.1797.1888.2964.41014.3
 -86.0-82.0-77.0-72.0-69.5-66.5-63.5-60.5-57.5-54.5-50.5
 -6.0-8.3-13.4-17.8-20.5-23.3-26.3-29.2-32.3-34.8-37.9

RSS values in the table are typical. Actual values may differ by up to ± 2 dB. 
1) Stability optimized (stronger) FEC 
2) Table cells contain values: 
 User Bit Rate [Mb/s]Bit Rate for the selected modulation and bandwidth
RSS (Received Signal Strength) [dBm]Minimum required RSS (RX Sensitivity threshold)
MSE (Mean Square Error) [dB]Maximum required MSE (the inverse of SNR)

Tab. 9.7: ACM switching 10 GHz according to MSE state

RAy3-10MSE degrade [dB] / MSE improve [dB] 
Channel
MHz
 Modulation
QPSK
_S1)
QPSK16
QAM
32
QAM
64
QAM
128
QAM
256
QAM
512
QAM
1024
QAM
2048
QAM
4096
QAM
3.5 -9.6-14.7-18.9-21.7-24.6-27.6-30.6-33.9-36.7 
 -10.6-15.7-19.9-22.7-25.6-28.6-31.6-34.9-37.7 
5 -9.7-14.8-19.0-21.7-24.5-27.6-30.5-33.8-36.6 
 -10.7-15.8-20.0-22.7-25.5-28.6-31.5-34.8-37.6 
7 -9.7-14.8-19.0-21.7-24.6-27.6-30.6-33.8-36.5-39.8
 -10.7-15.8-20.0-22.7-25.6-28.6-31.6-34.8-37.5-40.8
10 -9.7-14.8-19.0-21.8-24.6-27.6-30.6-33.8-36.5-39.8
 -10.7-15.8-20.0-22.8-25.6-28.6-31.6-34.8-37.5-40.8
14 -9.7-14.8-19.0-21.7-24.5-27.6-30.5-33.8-36.5-39.7
 -10.7-15.8-20.0-22.7-25.5-28.6-31.5-34.8-37.5-40.7
20 -9.7-14.8-19.1-21.8-24.5-27.6-30.5-33.8-36.5-39.7
 -10.7-15.8-20.1-22.8-25.5-28.6-31.5-34.8-37.5-40.7
28 -9.7-14.8-19.0-21.8-24.6-27.6-30.5-33.8-36.5-39.8
 -10.7-15.8-20.0-22.8-25.6-28.6-31.5-34.8-37.5-40.8
40 -9.7-14.8-19.0-21.8-24.5-27.6-30.5-33.7-36.5-39.7
 -10.7-15.8-20.0-22.8-25.5-28.6-31.5-34.7-37.5-40.7
50 -9.7-14.8-19.1-21.8-24.6-27.7-30.6-33.8-36.5-39.8
 -10.7-15.8-20.1-22.8-25.6-28.7-31.6-34.8-37.5-40.8
56 -9.7-14.8-19.1-21.8-24.6-27.7-30.6-33.8-36.5-39.8
 -10.7-15.8-20.1-22.8-25.6-28.7-31.6-34.8-37.5-40.8
84 -9.8-14.9-19.2-21.9-24.7-27.8-30.6-33.7-36.4-39.7
 -10.8-15.9-20.2-22.9-25.7-28.8-31.6-34.7-37.4-40.7
100 -9.8-14.9-19.3-22.0-24.8-27.8-30.6-33.7-36.4-39.7
 -10.8-15.9-20.3-23.0-25.8-28.8-31.6-34.7-37.4-40.7
112 -9.8-14.9-19.3-22.0-24.8-27.8-30.7-33.8-36.4-39.7
 -10.8-15.9-20.3-23.0-25.8-28.8-31.7-34.8-37.4-40.7

1) Stability optimized (stronger) FEC 

9.1.3. RAy3-10 Sub-bands

Tab. 9.8: Sub-band Upper/Lower limits, Duplex spacing 10 GHz

RAy3-10Sub-bands
Sub-bandSub-band TX Range [GHz]Duplex spacing [MHz]
Unit LUnit U 
Amin.10.30110.476Flexible; typ. 168 MHz,
min. 58 MHz, max. 284 MHz
max.10.42010.588
Bmin.10.12510.475350
max.10.32510.675

 

9.1.4. RAy3-10 Frequency tables

Tab. 9.9: Frequency tables 10 GHz

RAy3-10Frequency tables
NameDescriptionNote
rcinfo10_A_default10.30 – 10.59 GHzdefault duplex 168,
default table
VO-R/14/05.2020-7 (CZ only)
rcinfo10_B_default10.12 – 10.68 GHzduplex 350,
default table
CEPT/ERC/REC 12-05 E,
Rec. ITU-R F.747-1 (03/12),
Rec. ITU-R F.1568-1 (01/05)

 

9.1.5. RAy3-10/11/18 Emission designation

Tab. 9.10: Emission designation 10/11/18 GHz (ETSI)

for QPSK

3M22G7WEN, 6M68G7WEN, 13M3G7WEN, 26M9G7WEN, 53M7G7WEN, 74M7G7WEN, 106MG7WEN

for QAM

3M22D7WEN, 6M68D7WEN, 13M3D7WEN, 26M9D7WEN, 53M7D7WEN, 74M7D7WEN, 106MD7WEN

 

Tab. 9.11: Emission designation 10/11/18 GHz (FCC)

for QPSK

37M5G7W, 74M7G7W

for QAM

37M5D7W, 74M7D7W

 

9.2. RAy3-11 details (preliminary)

9.2.1. RAy3-11 Link speed

For preliminary Raw link speed 11 GHz see Table 9.5, “Raw link speed 10 GHz (displayed in user interface)” (speeds of both models are expected to be similar).

For preliminary Ethernet Link speed 11 GHz (according to RFC 2544) see Table 9.15, “Ethernet L2 Link speed 17/24 GHz (according to RFC 2544)” (speeds of both models are expected to be similar).

 

9.2.2. RAy3-11 Radio parameters

For preliminary Radio parameters 11 GHz see Table 9.22, “Radio parameters – 18 GHz, BER = 10-6 (radio parameters of both models are expected to be similar).

For preliminary ACM switching 11 GHz according to MSE state see similar table for 18 GHz in Table 9.15, “Ethernet L2 Link speed 17/24 GHz (according to RFC 2544)” (ACM parameters of both models are expected to be similar).

 

9.2.3. RAy3-11 Sub-bands

Tab. 9.12: RAy3-11 Sub-band Upper/Lower limits, Duplex spacing

RAy3-11Sub-bands
Sub-bandSub-band TX Range [GHz]Duplex spacing [MHz]
Unit LUnit U 
Amin.10.70011.199typ. 490 MHz (ETSI) or 530 MHz (rest of the world)
max.10.98911.491
Bmin.10.90511.395
max.11.19511.700

 

9.2.4. RAy3-11 Frequency tables

Tab. 9.13: Frequency tables 11 GHz

RAy3-11Frequency tables
NameDescriptionNote
rcinfo11_A_490_default10.7 – 11.5 GHzduplex 490,
default table
CEPT/ERC 12-06
VO-R/14/05.2020-7 (CZ only)
rcinfo11_B_490_default10.9 – 11.7 GHzduplex 490,
default table
rcinfo11_A_53010.7 – 11.5 GHzduplex 530ITU F.387-13 (11/2019)
rcinfo11_B_53010.9 – 11.7 GHzduplex 530
rcinfo11_A_FCC10.7 – 11.5 GHzduplex 490, FCC compliantFCC 47 CFR 101.147
rcinfo11_B_FCC10.9 – 11.7 GHzduplex 490, FCC compliant

 

9.2.5. RAy3-11 Emission designation 11 GHz

For preliminary Emission designation codes see table in Section 9.1.5, “RAy3-10/11/18 Emission designation” (designations of all 3 models are expected to be similar).

 

9.3. RAy3-17 details

9.3.1. RAy3-17/24 Link speed

Tab. 9.14: Raw link speed 17/24 GHz (displayed in user interface)

RAy3-17/24Raw link speed – Bit Rate [Mb/s] 
Channel
[MHz]
 Modulation
QPSK
_S1)
QPSK16
QAM
32
QAM
64
QAM
128
QAM
256
QAM
512
QAM
1024
QAM
2048
QAM
4096
QAM
3.5 2.64.99.5111517202223  
5 3.87.114162125283133  
7 5.7102024313742475257 
10 7.9142833435158647279 
14 1222425065788999110120129
20 1732607394112128143159173187
28 243982106133159182204229251272
40 3454114149186222255286321352380
56 4982170215270322370418464506546
80 70116242306385459526595660720 
100 87146302385484574659743829904 
112 981633384315426437388329281012 

1) Stability optimized (stronger) FEC 
[Note]Note

Values are equal to Eth L1 throughput @ 2.5 GE SFP port for 1518 B frames according RFC 2544 test (starting with FW 2.0.14.0).

Tabulka ke zrušení 
 

Tab. 9.15: Ethernet L2 Link speed 17/24 GHz (according to RFC 2544)

RAy3-17/24Link speed [Mb/s] for Eth L2 frames 64 B / 1518 B / 9018 B 
Channel
[MHz]
 Modulation
QPSK
_S1)
QPSK16
QAM
32
QAM
64
QAM
128
QAM
256
QAM
512
QAM
1024
QAM
2048
QAM
4096
QAM
3.5 2.44.68.8111416182021  
 2.64.79.3111417192123  
 2.64.89.4111417192123  
5 3.56.613152023262931  
 3.66.913162124273033  
 3.67.013162124283133  
7 5.29.81923293439444853 
 5.5102024313641465157 
 5.6102024313742465157 
10 7.3132631404754606773 
 7.7142733425057647178 
 7.8142733425057647178 
14 1121394761728292103112121
 1222415065778798109118128
 1222415065778898109119128
20 1630566888104119133148161174
 1732597293111126141157171184
 1732597293111127141157171185
28 23367699124148170190213234252
 243881105131157180202226248268
 243881105132157180202227248269
40 3250107139174207238267299328352
 3453113147184220252282317347375
 3454113147184220252283317348376
56 4676158200252300345390432471508
 4881168212267318365413458499539
 4881168213267319366413459500540
80 65108226285358428491555615671 
 69115239302380453519587651711 
 69115239303380454520588653712 
100 81136281358451535615692739760 
 86144297380478567651733817892 
 86144298381479568652735820894 
112 91152314393505599688740761762 
 96161333425535635728821916987 
 97161334426536636730823918998 

1) Stability optimized (stronger) FEC 

9.3.2. RAy3-17/24 Radio parameters

Tab. 9.16: Radio parameters 17/24 GHz, BER = 10-6

RAy3-17/24Bit Rate [Mb/s] / RSS [dBm] / MSE [dB]2) 
Channel
[MHz]
 Modulation
QPSK
_S1)
QPSK16
QAM
32
QAM
64
QAM
128
QAM
256
QAM
512
QAM
1024
QAM
2048
QAM
4096
QAM
3.5 2.64.99.511.514.717.219.521.623.2  
 -100.5-96.0-90.0-86.5-83.5-80.5-77.5-74.5-71.0  
 -6.1-9.0-15.2-18.4-21.6-24.9-28.0-31.0-34.6  
5 3.87.113.616.421.024.727.930.933.1  
 -99.0-94.5-89.0-85.5-82.5-79.5-76.5-73.5-70.5  
 -6.5-9.0-15.1-18.0-21.3-24.6-27.6-30.7-34.3  
7 5.710.520.124.230.937.042.146.752.257.4 
 -97.0-93.5-88.0-84.5-81.5-78.5-75.5-72.5-68.5-64.5 
 -6.2-8.5-14.4-17.7-20.9-24.2-27.5-30.3-34.6-38.2 
10 7.914.427.633.442.750.957.964.571.879.0 
 -95.0-92.0-86.5-83.0-80.0-77.0-74.0-71.0-67.5-64.0 
 -7.0-8.5-14.4-17.4-20.5-23.8-26.9-29.7-33.6-37.0 
14 11.822.341.650.465.477.788.799.3110.4119.8129.4
 -93.5-90.5-85.0-81.5-78.5-75.5-72.5-69.5-66.5-63.0-59.0
 -6.6-8.7-14.3-17.4-20.6-23.6-26.7-29.6-33.3-36.5-40.2
20 17.232.260.072.794.3112.1127.9143.2159.2172.8186.7
 -93.0-89.0-83.5-80.0-77.0-74.0-71.0-68.0-65.0-62.0-58.5
 -6.1-8.7-14.2-17.3-20.2-23.5-26.5-29.3-32.6-35.4-39.1
28 24.438.781.8106.3133.2158.9182.3204.5229.2251.3271.8
 -92.5-89.5-83.0-78.5-75.5-72.5-69.5-66.5-63.5-60.5-57.5
 -5.8-7.2-13.5-17.2-20.1-23.3-26.2-29.2-32.7-35.5-38.7
40 34.254.1114.5148.9186.5222.4255.2286.2321.0351.8380.4
 -90.5-87.5-81.0-77.0-74.0-71.0-68.0-65.0-62.0-59.0-56.0
 -5.8-7.3-13.6-17.3-20.1-23.3-26.1-29.0-32.4-35.2-38.1
56 49.081.8170.1215.1270.3322.5369.8418.1463.8506.1545.6
 -89.5-86.0-79.0-75.0-72.0-69.0-66.0-63.0-60.0-57.0-54.0
 -5.5-7.3-13.9-17.4-20.2-23.4-26.5-29.3-32.3-35.0-38.2
80 69.8116.3242.1306.1384.6458.9526.3595.0660.0720.2 
 -88.0-84.5-77.5-73.5-70.5-67.5-64.5-61.5-58.5-55.5 
 -5.5-7.3-13.8-17.5-20.2-23.5-26.5-29.4-32.4-35.0 
100 87.3145.8301.6384.7484.2574.4659.2743.2828.6904.3 
 -87.0-83.5-76.5-72.5-69.5-66.5-63.5-60.5-57.5-54.5 
 -5.6-7.4-13.7-17.2-20.3-23.3-26.3-29.0-32.2-34.9 
112 97.8163.3337.6430.7542.1643.1738.0832.1927.71012.3 
 -86.5-83.0-76.0-72.0-69.0-66.0-63.0-60.0-57.0-54.0 
 -5.5-7.3-13.7-17.2-20.3-23.2-26.5-29.1-32.2-35.0 

RSS values in the table are typical. Actual values may differ by up to ± 2 dB. 
1) Stability optimized (stronger) FEC 
2) Table cells contain values: 
 User Bit Rate [Mb/s]Bit Rate for the selected modulation and bandwidth
RSS (Received Signal Strength) [dBm]Minimum required RSS (RX Sensitivity threshold)
MSE (Mean Square Error) [dB]Maximum required MSE (the inverse of SNR)

Tab. 9.17: ACM switching 17/24 GHz according to MSE state

RAy3-17/24MSE degrade [dB] / MSE improve [dB] 
Channel
MHz
 Modulation
QPSK
_S1)
QPSK16
QAM
32
QAM
64
QAM
128
QAM
256
QAM
512
QAM
1024
QAM
2048
QAM
4096
QAM
3.5 -10.5-16.7-19.9-23.1-26.4-29.5-32.5-36.1  
 -11.5-17.7-20.9-24.1-27.4-30.5-33.5-37.1  
5 -10.5-16.6-19.5-22.8-26.1-29.1-32.2-35.8  
 -11.5-17.6-20.5-23.8-27.1-30.1-33.2-36.8  
7 -10.0-15.9-19.2-22.4-25.7-29.0-31.8-36.1-39.7 
 -11.0-16.9-20.2-23.4-26.7-30.0-32.8-37.1-40.7 
10 -10.0-15.9-18.9-22.0-25.3-28.4-31.2-35.1-38.5 
 -11.0-16.9-19.9-23.0-26.3-29.4-32.2-36.1-39.5 
14 -10.2-15.8-18.9-22.1-25.1-28.2-31.1-34.8-38.0-41.7
 -11.2-16.8-19.9-23.1-26.1-29.2-32.1-35.8-39.0-42.7
20 -10.2-15.7-18.8-21.7-25.0-28.0-30.8-34.1-36.9-40.6
 -11.2-16.7-19.8-22.7-26.0-29.0-31.8-35.1-37.9-41.6
28 -8.7-15.0-18.8-21.6-24.8-27.7-30.6-34.2-37.0-40.2
 -9.7-16.0-19.8-22.6-25.8-28.7-31.6-35.2-38.2-41.2
40 -8.8-15.1-18.8-21.6-24.8-27.6-30.5-33.9-36.7-39.6
 -9.8-16.1-19.8-22.6-25.8-28.6-31.5-34.9-37.7-40.6
56 -8.8-15.4-18.9-21.7-24.9-28.0-30.8-33.8-36.5-39.7
 -9.8-16.4-19.9-22.7-25.9-29.0-31.8-34.8-37.5-40.7
80 -8.8-15.3-19.0-21.7-25.0-28.0-30.9-33.9-36.5 
 -9.8-16.3-20.0-22.7-26.0-29.0-31.9-34.9-37.5 
100 -8.8-15.2-18.7-21.8-24.7-28.0-30.6-33.7-36.5 
 -9.8-16.2-19.7-22.8-25.7-29.0-31.6-34.7-37.5 
112 -8.8-15.2-18.7-21.8-24.7-28.0-30.6-33.7-36.5 
 -9.8-16.2-19.7-22.8-25.7-29.0-31.6-34.7-37.5 

1) Stability optimized (stronger) FEC 

9.3.3. RAy3-17 Frequency Limits

Tab. 9.18: RAy3-17 Upper/Lower frequency limits

RAy3-17Frequency limits
 TX Range [GHz]Duplex spacing [GHz]
 Unit LUnit U 
min.17.10417.104Flexible, min. 24 MHz between channel edges or 18 MHz in case of 2× 112 MHz channel
max.17.29617.296

 

9.3.4. RAy3-17 Frequency tables

Tab. 9.19: Frequency tables 17 GHz

RAy3-17Frequency tables
NameDescriptionNote
rcinfo17_ISM200_default17.1 – 17.3 GHzdefault table

VO-R/12/11.2021-11 (CZ only),
channels placement optimized for the band 200 MHz wide


The microwave link contains one or more frequency tables (called rcinfo), see menu Radio adaptation. Tables are labeled in format <name:version>, e.g.: rcinfo17_ISM200_default:15

 

9.3.5. RAy3-17/24 Emission Designation

Tab. 9.20: Emission Designation 17/24 GHz (ETSI)

for QPSK

107MG7WEN, 95M5G7WEN, 76M6G7WEN, 53M9G7WEN, 37M6G7WEN, 27M0G7WEN, 19M2G7WEN, 13M5G7WEN, 9M03G7WEN, 6M70G7WEN, 4M50G7WEN, 3M20G7WEN

for QAM

107MD7WEN, 95M5D7WEN, 76M6D7WEN, 53M9D7WEN, 37M6D7WEN, 27M0D7WEN, 19M2D7WEN, 13M5D7WEN, 9M03D7WEN, 6M70D7WEN, 4M50D7WEN, 3M20D7WEN

 

9.4. RAy3-18 details

9.4.1. RAy3-18 Link speed

Tab. 9.21: Raw link speed 18 GHz (displayed in user interface)

RAy3-18Raw link speed – Bit Rate [Mb/s] 
Channel
[MHz]
 Modulation
QPSK
_S1)
QPSK16
QAM
32
QAM
64
QAM
128
QAM
256
QAM
512
QAM
1024
QAM
2048
QAM
4096
QAM
3.5 2.95.0912161821242730 
5 4.07.21217222631353842 
7 & 7.5 6.010182532384450556165
10 8.214253444526069778489
13.75 12213650657688100111122130
20 1729507090106122139155170180
27.5 & 30 244273102130154178201224245262
40 3459102142182214247281314344365
50 4273126175224265306347388425451
55 & 60 4984146204261308356403448491525
80 68117203283362427494560624678711
100 85147254354454535619702782850891
110 971672894035176097047978889641014

1) Stability optimized (stronger) FEC 
  
[Note]Note

Values are equal to Eth L1 throughput @ 2.5 GE SFP port for 1518 B frames according RFC 2544 test (starting with FW 2.0.14.0).

9.4.2. RAy3-18 Radio parameters

Tab. 9.22: Radio parameters – 18 GHz, BER = 10-6

RAy3-18Bit Rate [Mb/s] / RSS [dBm] / MSE [dB]2) 
Channel
[MHz]
 Modulation
QPSK
_S1)
QPSK16
QAM
32
QAM
64
QAM
128
QAM
256
QAM
512
QAM
1024
QAM
2048
QAM
4096
QAM
3.5 2.95.08.712.115.618.421.124.127.029.6 
 -101.5-98.0-93.5-88.5-85.5-83.0-80.0-77.0-73.5-70.0 
 -5.8-8.1-13.2-17.4-20.2-23.1-26.1-29.1-32.4-35.2 
5 4.07.212.417.422.426.430.534.638.542.1 
 -100.5-96.5-92.0-87.0-84.0-81.5-78.5-75.5-72.0-68.5 
 -5.8-8.2-13.3-17.5-20.2-23.0-26.1-29.0-32.3-35.1 
7 & 7.5 6.010.418.025.232.338.143.949.855.560.865.0
 -98.5-94.5-89.5-85.0-82.0-79.5-76.5-73.5-70.5-67.0-63.0
 -5.9-8.2-13.3-17.5-20.2-23.1-26.1-29.1-32.3-35.0-38.3
10 8.214.324.834.444.352.160.468.576.684.089.1
 -97.0-93.0-88.0-83.5-80.5-78.0-75.0-72.0-69.0-65.5-61.5
 -5.9-8.2-13.3-17.5-20.3-23.1-26.1-29.1-32.3-35.0-38.3
13.75 12.120.736.250.464.776.288.199.8111.1121.7130.1
 -95.5-91.5-86.5-82.0-79.0-76.5-73.5-70.5-67.5-64.0-60.0
 -5.9-8.2-13.3-17.5-20.2-23.0-26.1-29.0-32.3-35.0-38.2
20 16.729.050.270.089.7105.8122.3138.7155.2170.0180.5
 -94.0-90.0-85.0-80.5-77.5-75.0-72.0-69.0-66.0-62.5-59.0
 -5.9-8.2-13.3-17.6-20.3-23.0-26.1-29.0-32.3-35.0-38.2
27.5 & 30 24.442.273.0101.7130.4153.8177.7201.2224.0245.4262.3
 -92.5-88.5-83.5-79.0-76.0-73.5-70.5-67.5-64.5-61.0-57.5
 -6.0-8.2-13.3-17.5-20.3-23.1-26.1-29.0-32.3-35.0-38.3
40 34.058.7101.6141.7181.6214.1247.4280.7314.0344.0365.2
 -91.0-87.0-82.0-77.5-74.5-72.0-69.0-66.0-63.0-60.0-56.0
 -5.9-8.2-13.3-17.5-20.3-23.0-26.1-29.0-32.2-35.0-38.2
50 41.972.6125.7175.1224.5264.7305.8346.9388.1425.2451.3
 -90.0-86.0-81.0-76.5-73.5-71.0-68.0-65.0-62.0-59.0-55.0
 -5.9-8.2-13.3-17.6-20.3-23.1-26.2-29.1-32.2-35.0-38.3
55 & 60 48.984.4146.1203.6261.0307.7355.5402.5448.1490.9524.7
 -89.0-85.0-80.0-75.5-72.5-70.0-67.0-64.0-61.0-58.0-54.0
 -5.9-8.2-13.3-17.6-20.3-23.1-26.2-29.1-32.2-35.0-38.3
80 67.8117.2202.9282.7362.3427.2493.6559.9623.6677.7711.1
 -88.0-84.0-79.0-74.0-71.5-68.5-65.5-62.5-59.5-56.5-52.5
 -6.0-8.3-13.4-17.7-20.4-23.2-26.3-29.1-32.2-34.8-38.0
100 85.1147.0254.3354.4454.2535.5618.7701.8781.8849.6891.5
 -87.0-83.0-78.0-73.0-70.5-67.5-64.5-61.5-58.5-55.0-51.0
 -6.0-8.3-13.4-17.8-20.5-23.3-26.3-29.1-32.2-34.8-37.9
110 96.9167.3289.4403.2516.9609.4704.1797.1888.2964.41014.3
 -86.5-82.5-77.5-72.5-70.0-67.0-64.0-61.0-57.5-53.5-49.5
 -6.0-8.3-13.4-17.8-20.5-23.3-26.3-29.2-32.3-34.8-37.9

RSS values in the table are typical. Actual values may differ by up to ± 2 dB. 
1) Stability optimized (stronger) FEC 
2) Table cells contain values: 
 User Bit Rate [Mb/s]Bit Rate for the selected modulation and bandwidth
RSS (Received Signal Strength) [dBm]Minimum required RSS (RX Sensitivity threshold)
MSE (Mean Square Error) [dB]Maximum required MSE (the inverse of SNR)

Tab. 9.23: ACM switching – 18 GHz according to MSE state

RAy3-18MSE degrade [dB] / MSE improve [dB] 
Channel
MHz
 Modulation
QPSK
_S1)
QPSK16
QAM
32
QAM
64
QAM
128
QAM
256
QAM
512
QAM
1024
QAM
2048
QAM
4096
QAM
3.5 -9.6-14.7-18.9-21.7-24.6-27.6-30.6-33.9-36.7 
 -10.6-15.7-19.9-22.7-25.6-28.6-31.6-34.9-37.7 
5 -9.7-14.8-19.0-21.7-24.5-27.6-30.5-33.8-36.6 
 -10.7-15.8-20.0-22.7-25.5-28.6-31.5-34.8-37.6 
7 & 7.5 -9.7-14.8-19.0-21.7-24.6-27.6-30.6-33.8-36.5-39.8
 -10.7-15.8-20.0-22.7-25.6-28.6-31.6-34.8-37.5-40.8
10 -9.7-14.8-19.0-21.8-24.6-27.6-30.6-33.8-36.5-39.8
 -10.7-15.8-20.0-22.8-25.6-28.6-31.6-34.8-37.5-40.8
13.75 -9.7-14.8-19.0-21.7-24.5-27.6-30.5-33.8-36.5-39.7
 -10.7-15.8-20.0-22.7-25.5-28.6-31.5-34.8-37.5-40.7
20 -9.7-14.8-19.1-21.8-24.5-27.6-30.5-33.8-36.5-39.7
 -10.7-15.8-20.1-22.8-25.5-28.6-31.5-34.8-37.5-40.7
27.5 & 30 -9.7-14.8-19.0-21.8-24.6-27.6-30.5-33.8-36.5-39.8
 -10.7-15.8-20.0-22.8-25.6-28.6-31.5-34.8-37.5-40.8
40 -9.7-14.8-19.0-21.8-24.5-27.6-30.5-33.7-36.5-39.7
 -10.7-15.8-20.0-22.8-25.5-28.6-31.5-34.7-37.5-40.7
50 -9.7-14.8-19.1-21.8-24.6-27.7-30.6-33.8-36.5-39.8
 -10.7-15.8-20.1-22.8-25.6-28.7-31.6-34.8-37.5-40.8
55 & 60 -9.7-14.8-19.1-21.8-24.6-27.7-30.6-33.8-36.5-39.8
 -10.7-15.8-20.1-22.8-25.6-28.7-31.6-34.8-37.5-40.8
80 -9.8-14.9-19.2-21.9-24.7-27.8-30.6-33.7-36.4-39.7
 -10.8-15.9-20.2-22.9-25.7-28.8-31.6-34.7-37.4-40.7
100 -9.8-14.9-19.3-22.0-24.8-27.8-30.6-33.7-36.4-39.7
 -10.8-15.9-20.3-23.0-25.8-28.8-31.6-34.7-37.4-40.7
110 -9.8-14.9-19.3-22.0-24.8-27.8-30.7-33.8-36.4-39.7
 -10.8-15.9-20.3-23.0-25.8-28.8-31.7-34.8-37.4-40.7

1) Stability optimized (stronger) FEC 

9.4.3. RAy3-18 Sub-bands

Tab. 9.24: RAy3-18 Sub-band Upper/Lower limits, Duplex spacing

RAy3-18Sub-bands
Sub-bandSub-band TX Range [GHz]Duplex spacing [MHz]
Unit LUnit U 
Amin.17.70018.7101008, 1010
max.18.20919.219
Bmin.18.16719.1771008, 1010
max.18.69019.700
Cmin.17.70019.3001560
max.18.30019.700

 

9.4.4. RAy3-18 Frequency tables

Tab. 9.25: Frequency tables 18 GHz

RAy3-18Frequency tables
NameDescriptionNote
rcinfo18_A_default17.7 – 19.3 GHzdefault table

CEPT/ERC/REC 12-03 E,
Rec. ITU-R F.595-11, (02/22)

rcinfo18_B_default18.1 – 19.7 GHzdefault table
rcinfo18_C_default17.7 – 19.7 GHzdefault table, FCC compliant47 CFR Part 101 (FCC)

 

9.4.5. RAy3-18 Emission designation

For preliminary Emission designation codes see table in Section 9.1.5, “RAy3-10/11/18 Emission designation” (designations of all 3 models are expected to be similar).

 

9.5. RAy3-24 details

9.5.1. RAy3-24 Link speed

For Raw link speed 24 GHz see table Raw link speed 17/24 GHz.

For Ethernet L2 Link speed 24 GHz (according to RFC 2544) see table Ethernet L2 Link speed 17/24 GHz.

Tables are located in Section 9.3.1, “RAy3-17/24 Link speed” (parameters of both models are identical).

 

9.5.2. RAy3-24 Radio parameters

For Radio parameters 24 GHz see table Radio parameters 17/24 GHz.

For ACM switching according to MSE state see table ACM switching 17/24 GHz.

 

9.5.3. RAy3-24 Frequency Limits

Tab. 9.26: RAy3-24 Upper/Lower frequency limits

RAy3-24Frequency limits
 TX Range [GHz]Duplex spacing [GHz]
 Unit LUnit U 
min.24.00424.004Flexible, min. 24 MHz between channel edges or 18 MHz in case of 2× 112 MHz channel
max.24.24624.246

 

9.5.4. RAy3-24 Frequency tables

Tab. 9.27: Frequency tables 24 GHz

RAy3-24Frequency tables
NameDescriptionNote
rcinfo24_ISM250_default24.000 – 24.250 GHzdefault table

VO-R/10/07.2021-8 (CZ only),
CEPT/ERC/REC 70-03, channels placement optimized for the band 250 MHz wide

rcinfo24_ISM250_-9dBm24.000 – 24.250 GHzlimited RF power
rcinfo24_ISM250_-15dBm24.000 – 24.250 GHzlimited RF power
rcinfo24_ISM20024.050 – 24.250 GHz CFR 47 part 15 (FCC), channels placement optimized for the band 200 MHz wide
rcinfo24_ISM15024.000 – 24.150 GHz channels placement optimized for the band 150 MHz wide

The microwave link contains one or more frequency tables (called rcinfo), see menu Radio adaptation. Tables are labeled in format <name:version>, e.g.: rcinfo24_ISM250_default:15

 

9.5.5. RAy3-24 Emission designation 24 GHz

For Emission designation codes see table in Section 9.3.5, “RAy3-17/24 Emission Designation” (designations of both models are identical).

 

9.6. RAy3-80 details

9.6.1. RAy3-80 Link speed

Tab. 9.28: Raw link speed 80 GHz (displayed in user interface)

RAy3-80Raw link speed – Bit Rate [Mb/s] 
Channel
[MHz]
 Modulation
2 PSK1) 2 PSK2) 2 PSK3)2 PSK4 PSK8 PSK16
QAM
32
QAM
64
QAM
128
QAM
250 25.443.487174348523756931  
500 51.788.11763527071061153318882242 
750 77.5132264528105915902298282933603715
1000 102.8175351702140721133053375944644935
1250 129220440880176526503830471656016191
1500 1552645281056211831814597565967217429
1750 1813086161232247237115363660278418667
2000 1993386761353271240735886724686069512

1) 2PSK_BW/4_S   Stability optimized (stronger) FEC & Quarter Bandwidth 
2) 2PSK_BW/4   Quarter Bandwidth (Channel reduced to 1/4) 
3) 2PSK_BW/2   Half Bandwidth (Channel reduced to 1/2) 
[Note]Note

Values are equal to Eth L1 throughput @ 10GE port for 1518 B frames (RFC 2544 test).

Tab. 9.29: Ethernet L1 Link speed 80 GHz (according to RFC 2544)

RAy3-80Link speed [Mb/s] for Eth L1 frames 64 B / 1518 B 
Channel
[MHz]
 Modulation 
2 PSK1) 2 PSK2) 2 PSK3)2 PSK4 PSK8 PSK16
QAM
32
QAM
64
QAM
128
QAM
250 31531062124266399241138  
 254387174348523756931  
500 631082154318641297187523082741 
 52881763527071061153318882242 
750 95161323646129519442810345941084541
 78132264528105915902298282933603715
1000 126214429858172025833733459554576033
 103175351702140721133053375944644935
1250 1582695381076215832404683576568477568
 129220440880176526503830471656016191
1500 1903236461291259038885619691782169081
 1552645281056211831814597565967217429
1750 22137775315073021453665568070958510000
 1813086161232247237115363660278418667
2000 243413827165333164978719588571000010000
 1993386761353271240735886724686069512

1) 2PSK_BW/4_S   Stability optimized (stronger) FEC & Quarter Bandwidth 
2) 2PSK_BW/4   Quarter Bandwidth (Channel reduced to 1/4) 
3) 2PSK_BW/2   Half Bandwidth (Channel reduced to 1/2) 

Tab. 9.30: Ethernet L2 Link speed 80 GHz (according to RFC 2544)

RAy3-80Link speed [Mb/s] for Eth L2 frames 64 B / 1518 B 
Channel
[MHz]
 Modulation 
2 PSK1) 2 PSK2) 2 PSK3)2 PSK4 PSK8 PSK16
QAM
32
QAM
64
QAM
128
QAM
250 244081162324487704867  
 254386171344516746918  
500 4882164328658988142817582088 
 51871743486981047151418632213 
750 7212324649298714812141263531303460
 76130260521104515702268279333173666
1000 96163327653131119682844350141584596
 101173346693138920853014371044064871
1250 120205410820164424693568439252165766
 127217434869174226163781465455286110
1500 144246492984197329624281527062606919
 1532605211043209131394537558566347332
1750 1682875741148230234564995614973037619
 1783046081216243936625293651677398554
2000 1853156301260252637935482674976197619
 1963346681335267740205809715284949389

1) 2PSK_BW/4_S   Stability optimized (stronger) FEC & Quarter Bandwidth 
2) 2PSK_BW/4   Quarter Bandwidth (Channel reduced to 1/4) 
3) 2PSK_BW/2   Half Bandwidth (Channel reduced to 1/2) 

9.6.2. RAy3-80 Radio parameters

Tab. 9.31: Radio parameters 80 GHz, BER = 10-6

RAy3-80Bit Rate [Mb/s] / RSS [dBm] / MSE [dB] 4) 
Channel
[MHz]
 Modulation
2 PSK1) 2 PSK2) 2 PSK3)2 PSK4 PSK8 PSK16
QAM
32
QAM
64
QAM
128
QAM
250 25.443.486.7173.7348.4523.0755.9930.6  
 -85.0-82.0-79.0-76.0-73.0-68.0-65.0-62.0  
 -4.1-6.1-6.1-6.1-8.1-13.0-16.2-18.6  
500 51.788.1176.2352.4706.71061.01533.51887.82242.1 
 -82.0-79.0-76.0-73.0-70.0-65.0-61.0-59.0-56.0 
 -4.1-6.1-6.1-6.1-8.2-13.1-16.2-18.6-21.0 
750 77.5132.0263.9528.11059.21590.22298.32829.43360.43714.5
 -80.0-77.0-74.0-71.0-68.0-63.0-59.0-57.0-54.0-51.0
 -4.1-6.1-6.1-6.1-8.4-13.3-16.2-18.7-21.1-23.6
1000 102.8175.4350.8701.71407.22112.73053.43758.94464.44934.8
 -79.0-76.0-73.0-70.0-67.0-62.0-58.0-56.0-53.0-50.0
 -4.1-6.1-6.1-6.1-8.4-13.3-16.2-18.4-21.1-23.6
1250 129.0220.0440.1880.21765.32650.43830.54715.65600.76190.8
 -78.0-75.0-72.0-69.0-66.0-61.0-57.0-55.0-52.0-49.0
 -4.1-6.1-6.1-6.1-8.4-13.3-16.2-18.7-21.1-23.6
1500 155.0263.9528.11056.32118.43180.54596.75658.86720.97429.0
 -77.0-74.0-71.0-68.0-65.0-60.0-56.0-54.0-51.0-47.5
 -4.1-6.1-6.1-6.1-8.5-13.5-16.2-18.8-21.2-23.6
1750 180.7308.1616.21232.32471.53710.65362.86601.97841.08667.1
 -76.5-73.5-70.5-67.5-64.5-59.5-55.5-53.5-50.5-47.0
 -4.1-6.1-6.1-6.1-8.5-13.5-16.2-18.8-21.2-23.6
2000 198.5338.1676.31352.52712.54072.55885.87245.88605.79512.4
 -76.0-73.0-70.0-67.0-64.0-59.0-55.0-53.0-50.0-46.5
 -4.1-6.1-6.1-6.1-8.5-13.5-16.2-18.8-21.2-23.6

1) 2PSK_BW/4_S   Stability optimized (stronger) FEC & Quarter Bandwidth 
2) 2PSK_BW/4   Quarter Bandwidth (Channel reduced to 1/4) 
3) 2PSK_BW/2   Half Bandwidth (Channel reduced to 1/2) 
4) Table cells contain values: 
 Bit Rate [Mb/s]User Raw link speed = Eth L1 Bit Rate
RSS (Received Signal Strength) [dBm]Minimum required RSS (RX Sensitivity threshold)
MSE (Mean Square Error) [dB]Maximum required MSE (the inverse of SNR)
  

Tab. 9.32: TX power range 80 GHz

RAy3-80 TX power range [dBm]ver. 1.0
ModulationMinimum TX power [dBm]Maximum TX power [dBm]
2PSK_BW/4_S 1)
up to 16QAM
-6+20
32QAM-6+17
64QAM-6+16
128QAM-6+14

1) Stability optimized (stronger) FEC & Quarter Bandwidth (Channel reduced to 1/4) 

Tab. 9.33: ACM switching 80 GHz according to MSE state

RAy3-80MSE degrade [dB] / MSE improve [dB] 
Channel
[MHz]
 Modulation
2 PSK1) 2 PSK2) 2 PSK3)2 PSK4 PSK8 PSK16
QAM
32
QAM
64
QAM
128
QAM
250 -8.1-8.1-8.1-10.1-16.0-19.2-21.6  
 -8.1-11.6-11.6-12.1-17.0-20.2-22.6  
500 -8.1-8.1-8.1-10.2-16.1-19.2-21.6-24.0 
 -8.1-11.6-11.6-12.2-17.1-20.2-22.6-25.0 
750 -8.1-8.1-8.1-10.4-16.3-19.2-21.7-24.1-26.6
 -8.1-11.6-11.6-12.4-17.3-20.2-22.7-25.1-27.6
1000 -8.1-8.1-8.1-10.4-16.3-19.2-21.7-24.1-26.6
 -8.1-11.6-11.6-12.4-17.3-20.2-22.7-25.1-27.6
1250 -8.1-8.1-8.1-10.4-16.3-19.2-21.7-24.1-26.6
 -8.1-11.6-11.6-12.4-17.3-20.2-22.7-25.1-27.6
1500 -8.1-8.1-8.1-10.5-16.5-19.2-21.8-24.2-26.4
 -8.1-11.6-11.6-12.5-17.5-20.2-22.8-25.2-26.9
1750 -8.1-8.1-8.1-10.5-16.5-19.2-21.8-24.2-26.4
 -8.1-11.6-11.6-12.5-17.5-20.2-22.8-25.2-26.9
2000 -8.1-8.1-8.1-10.5-16.5-19.2-21.8-24.2-26.4
 -8.1-11.6-11.6-12.5-17.5-20.2-22.8-25.2-26.9

1) 2PSK_BW/4_S   Stability optimized (stronger) FEC & Quarter Bandwidth 
2) 2PSK_BW/4   Quarter Bandwidth (Channel reduced to 1/4) 
3) 2PSK_BW/2   Half Bandwidth (Channel reduced to 1/2) 

9.6.3. RAy3-80 Frequency Limits

Tab. 9.34: RAy3-80 Upper/Lower frequency limits, Duplex spacing

RAy3-80Frequency limits
 TX Range [GHz]Duplex spacing [GHz]
 Unit LUnit U 
min.71.00081.000Flexible; typ. 10 GHz, min. 5 GHz, max. 15 GHz
max.76.00086.000

 

9.6.4. RAy3-80 Frequency tables

Tab. 9.35: Frequency tables 80 GHz

RAy3-10Frequency tables
NameDescriptionNote
rcinfo80_default71-76 and 81-86 GHzdefault tableITU-R F.2006 (03/2012)
ECC REC (05)07 (revised 2009 and 2013)
FCC 47 CFR, part 15
VO-R/23/09.2013-5 (CZ only)

©  2024 RACOM s.r.o. All Rights Reserved.