Radio parameters |
| The same as RipEX2 units used |
Electrical |
| Primary power | HW models: | 100–240 V AC, 50–60 Hz |
| 36–60 V DC, positive grounding possible |
| 10–30 V DC |
| 18-30 V DC, positive grounding possible |
| Individual power supply for each RipEX2 unit |
| Power consumption | HS own consumption typically <10 W (+ 1× Rx + 1× Rx/Tx
of individual units) |
Interfaces |
| Ethernet | 1× 10/100 Base-T Auto MDI/MDIX
switched with
1×
10/100/1000 Base-T
1000Base-SX/1000 Base-LX | 1x RJ45,
1x SFP |
| COM | RS232/RS485 SW configurable | DB9F |
| 600–115 200 bps | |
| Antenna | 50 Ω | N-female(s) |
| | HW models
(according to Antenna) |
| 2× N-female | – separate Tx / Rx and Rx, switched |
| 4× N-female | – separate Rx and Tx, separate for each RipEX2
unit |
| HW inputs, HW outputs | “A” unit alarm, “B” unit alarm, HS controller alarm, “A”
and/or “B” alarm |
Environmental |
| IP Code (Ingress Protection) | IP40 |
| MTBF | > 900 000 (> 100 years) |
| Operating temperature | – 40 to +70 °C (-40 to +158 °F) |
| Humidity | 5 to 95 % non-condensing |
| Storage | −40 to +85 °C (−40 to +185 °F) | 5 to 95 %
non-condensing |
Mechanical |
| Dimensions HS | 19″ rack 3U | H × W × D: 120 × 442 × 360 mm (4.72 × 17.40 × 14.17 in)
|
| Dimensions RD | 19″ rack 2U | H × W × D: 87 × 442 × 360 mm (3.42 × 17.40 × 14.17
in) |
| Dimensions RS | 19″ rack 2U | H × W × D: 87 × 442 × 360 mm (3.42 × 17.40 × 14.17
in) |
| Weight HS | 8.9 kg (19.6 lbs), RipEX2 units exl. |
| 12.1 kg (26.7 lbs), RipEX2 units incl. |
| Weight RD | 7.8 kg (17.2 lbs), RipEX2 units exl. |
| 10.9 kg (24 lbs), RipEX2 units incl. |
| Weight RS | 7.45 kg (16.42 lbs), RipEX2 unit and duplexer
incl. |
Diagnostic and
Management |
| Standard for individual RipEX2 units used |
| LED panels | For each RipEX2 unit: standard RipEX2 LED panel (5×
tri-color LEDs: SYS, AUX, RX, TX, COM)
+ 3× two-color LEDs: (A, AUTO, B) +
1x ETH5(SFP) |
Approvals |
| CE | RED, RoHS, WEEE |