SETR-firmware

  1. Manuals
  2. SETR-firmware
https//www.racom.eu/eng/support/firmware/mr400/index.html
MORSE Firmware Documentation
   Next

Print version

MORSE Firmware Documentation

SETR software

version 1.17

9/20/2013

Table of Contents

1. MORSE main menu [sv 7.26]
1.1. Managing the MORSE main menu
1.2. CU Configuration Services
1.3. Useful tips
2. Hardware [sv 8.03]
3. Communication Unit [sv 7.26]
4. Radio part [sv 9.30]
4.1. Radio hardware
4.2. Radio parameters
4.3. Radio calibration
5. Nodes [sv 8.03]
6. Morse Redundancy Solution [sv 9.30]
6.1. Node extensions
6.2. Globals – Mobile mode
6.3. Hierarchy routing table
7. Broadcasting [sv 7.26]
8. SC Channels [sv 7.26]
8.1. SC Channel to Node Interface
8.2. SC Protocol
8.3. SC eXtensions
9. RF Channels [sv 10.0.28.0]
9.1. RF Channel to Node Interface
9.2. RF Access
9.3. RF Protocol
9.4. RF Modem
10. Ethernet [sv 10.0.94.0]
10.1. Ethernet Channel to Node Interface
10.2. Hardware configuration
10.3. Setting protocol parameters
11. NAG Channels [sv 7.26]
11.1. NAG Channel to Node Interface
11.2. NAG Protocol
12. Address resolution table [sv 7.26]
13. Routing (retranslation) tables [sv 7.26]
14. Menu (c)nf [sv 7.45]
15. Misc – supplementary functions [sv 7.26]
16. Service [sv 7.26]
16.1. (h)eap info
16.2. (V) (v)ersion
16.3. RF service (R)X
16.4. RFservice (T)X
16.5. (e)cho
16.6. unit (s)tatus
16.7. (t)ime
16.8. (g)o
16.9. (c)lock info
16.10. loop (i)nfo
16.11. (r)adio mem c(o)mp ch(k)
16.12. (m)obil
17. Diagnostic [sv 7.26]
18. Monitoring
18.1. Routing of the monitoring messages
18.2. Monitoring SCC channels
18.3. Monitoring RFC channels
18.4. Monitoring ETH channels
18.5. Monitoring NAG channels
19. Statistic logs
19.1. LINKS LIST
19.2. CALLS LIST
19.3. SCC PORTS LOG
19.4. NET USER LOG
19.5. RF MEDIUM LOG
19.6. ETHERNET LOG
20. Events
21. Tests
21.1. STATISTIC TEST
21.2. BER TEST
21.3. SEND PACKET
21.4. PING TEST
21.5. ROUND TEST
21.6. MEMLOAD
22. Channel send
22.1. Enable RF(T)X
23. Path editor [sv 7.26]
23.1. Path packets and communication with remote stations
24. Help [sv 7.26]
25. CNI-channel to node interface [sv 9.30]
Index
A. Revision History

List of Figures

1.1. Radiomodem MR400
1.2. Before making command edit (i.e. in menu, which contains command edit
1.3. After making command edit (menu doesn’t contain command edit)
4.1. Before edit execution (i.e. in the menu, which contains the command edit).
4.2. After the edit function.
8.1. Signal way through interface
10.1. ARP table
   Next
   1. MORSE main menu

©  2024 RACOM s.r.o. All Rights Reserved.