RipEX2 je jediný plně CE & FCC certifikovaný 256 QAM rádiový modem na trhu.
Nikdy se nespoléhejte jen na hrubou přenosovou rychlost, která bývá uváděna v datových listech. Jediným platným parametrem pro výkon je Propustnost sítě z pohledu uživatele: kolik paketů/bajtů obsahových dat bylo úspěšně doručeno v daném časovém intervalu.
| Channel size | Gross data rate | Possible Network throughput | ||||
| RipEX | RipEX2 | RipEX2e | RipEX | RipEX2 | RipEX2e | |
| 6.25 kHz | 21 kb/s | 35 kb/s | 26 kb/s | > 25 kb/s | > 42 kb/s | > 32 kb/s |
| 12.5 kHz | 42 kb/s | 83 kb/s | 63 kb/s | > 50 kb/s | > 100 kb/s | > 75 kb/s |
| 25 kHz | 83 kb/s | 167 kb/s | 125 kb/s | > 100 kb/s | > 200 kb/s | > 150 kb/s |
| 50 kHz | 167 kb/s | 333 kb/s | 250 kb/s | > 200 kb/s | > 400 kb/s | > 300 kb/s |
| 100 kHz | – | 555 kb/s | – | – | > 700 kb/s | – |
| 150 kHz | – | 925 kb/s | – | – | > 1.1 Mb/s | – |
| 200 kHz | – | 1.1 Mb/s | – | – | > 1.4 Mb/s | – |
| 250 kHz (*) | – | 1.3 Mb/s | – | – | > 1.7 Mb/s | – |
| 300 kHz (*) | – | 1.7 Mb/s | – | – | > 2.1 Mb/s | – |
(*) K dispozici pouze v režimu Bridge
Dosažitelnou propustnost sítě zajišťuje:
Režim Stream mode (RipEX)
Kalkulace výkonu sítě RipEX.
Aplikační poznámka – Datová rychlost
Dosažitelnou propustnost sítě zajišťuje:
Režim Stream mode (RipEX)
Kalkulace výkonu sítě RipEX.
Aplikační poznámka – Datová rychlost
Zařízení
RipEX2, RipEX2e
RipEX
Řízení přístupu
RipEX2, RipEX2e
RipEX
Ochrana dat
RipEX2, RipEX2e
Ověřovací údaje (klíče a certifikáty)
Zařízení
VIBRATION AND SHOCK TEST
RipEX je nativní IP směrovač, tj. každé jednotlivé rozhraní, ať rádio, ETH či mobilní má své vlastní IP adresy a masky, zatímco COM porty jsou směrovány standardním způsobem – zprávy na ně mohou být doručeny na IP adresu libovolného rozhraní jako UDP datagramy s vybranými čísly portů UDP.
Bridge mode režim
Router mode režim
TCP proxy (RipEX)
ARP proxy (RipEX)
Rádiové protokoly
Volba protokolu na rádiového kanálu je nejdůležitějším krokem optimalizace propustnosti sítě. Spravuje přístup rádiomodemů na rádiové kanály pro přenos dat, zaručuje dodávky paketů a eliminuje kolize paketů.
Různé aplikace mají různé požadavky na
Pouze jeden protokol na rádiovém kanálu nestačí!
RipEX nabízí tři různé protokoly, optimalizované pro různé aplikace od starších sériových až po moderní TCP/IP, jako Modbus, IEC104, čímž RipEX představuje spolehlivé a stabilní řešení i s vysokým počtem RTU v síti.
| Transparent | Flexible | Base driven | |
| Topology | Any | Tree | Star |
| Repeaters | 1-2 possible | Unlimited | One on each link |
| Device mode | Bridge | Router | Router |
| Application | Master-slave | Any | Any, TCP/IP optimized |
| Base stations | Available | Available | Dedicated |
| Collisions | Unmanaged | Managed | Impossible |
| Packet acknowledgement | No | Yes | Yes |
Fyzická vrstva rádiových protokolů v jednotkách RipEX2 a RipEX2e je plně kompatibilní a jednotky lze kombinovat v jedné síti na stejné frekvenci. RipEX s nimi není kompatibilní a musí být provozován na samostatné frekvenci.
BASE DRIVEN
FLEXIBLE
TRANSPARENT
SCADA protokoly
Sériová rozhraní
Speciální SW ovladače mapují sériové adresy SCADA protokolu na RipEX IP adresy a snižují množství dat přenášených vzduchem.
RipEX2, RipEX2e, RipEX
pouze RipEX
Ethernet
Dynamické směrování
RipEX2, RipEX2e
RipEX
Záložní trasy
Funkce záložních tras výrazně zvyšuje spolehlivost sítě, automatickým přepínáním na alternativní trasu pokud dojde k výpadku. Alternativní trasa/y mohou být na rádiovém kanálu nebo mobilní síti nebo v jakékoli síti IP
BACKUP ROUTES
RipEX2, RipEX2e
RipEX
Rádiové a mobilní technologie (nebo IP sítě) jsou propojeny do jedné sítě a využívají nejlepší vlastnosti každé z nich.
| Charakteristika sítě | |
| Rádiová | Celulární/ Mobilní |
| Privátní síť – zcela pod kontrolou uživatele | Veřejná síť – závislost na 3. stranách Využije se stávající infrastruktura |
| Jeden uživatel – zaručená kapacita a chování | Více uživatelů může ovlivnit kapacitu a chování |
| Licencovaná frekvence – garantovaná kvalita služeb | Veřejné sítě – kvalita služeb není zaručena |
| Vyšší investice, garantované provozní poplatky placené vládě | Nižší investice, nepředvídatelné provozní poplatky placené soukromé společnosti |
| Klíčové a nutné aplikace v reálném čase | Potřebné ale ne nutné aplikace |
HYBRID NETWORKS
Migrační řešení se používá v případě modernizace starší rádiové sítě nebo pokud je vyžadováno současné použití dvou rádiových sítí.
Přínosy pro zákazníka
Technické parametry
MIGRATION SOLUTION
TUTORIAL VIDEO
Full duplex Point-to-Point Link
TUTORIAL VIDEOS
HW modely
RipEX2
RipEX2e
SW klíče
RipEX
Latest Radio and Cellular Routers in SCADA (anglicky)
Dozvíte se o „Nejnovějších trendech v bezdrátové komunikaci ve SCADA sítích“ a o tom, jak jim odpovídají výrobky společnosti RACOM. Budeme hovořit o příkladech z reálného života i o hybridních sítích, které kombinují různé typy datové komunikace. Nechybí ani příklady použití jednotek RipEX2e a M!DGE3, které byly v době konání webináře novinkou.
Next Generation IP Radio Modems (anglicky)
VHF/UHF rádiové modemy poslední generace pro privátní sítě umí věci, které byste nečekali. Dnes jsou to nativní IP zařízení, obrovsky se zvýšila datová rychlost a celková propustnost sítí, na rádiovém kanále lze nastavit standardní statický nebo dynamický IP routing včetně záložních tras. Na rádiovém kanále jsou k dispozici různé protokoly optimalizované pro různé aplikace, modemy splňují nejpřísnější bezpečnostní požadavky atd.
Modernizace rádiových datových sítí s MR400 (česky)
MR400, starší generace radiomodemů RACOM vyráběných od roku 2005, se blíží ke konci své životnosti. Dozvíte se, jak hladce zmodernizovat svou starší síť na naše nejnovější rádiové modemy RipEX2 a jaké výhody a nové možnosti tím získáte. Představeny budou také skutečné příběhy úspěšného přechodu z MR400 na RipEX2. Na závěr webináře nechybí online odpovědi na dotazy.
Trade name – trade and marketing name of the product. This name is used for all products within the same product family.
Possible values: RipEX
Gen. – generation of the product of specific Trade name. The very first generation does not have any number in this position.
Possible values: none, 2
Band – frequency band and sub-band
Possible values:
1A: 135–175 MHz
3A: 285–335 MHz
3B: 335–400 MHz
4A: 400–470 MHz
4B: 450–520 MHz
8A: 803–897 MHz
9A: 860–960 MHz
Ext. – Extension module embedded in mPCIe slot
Possible values:
N – not used (the only option for RipEX2e)
W – Extension cellular module; Part No.:
mPCIe-W
Bands W - 4G/3G/2G, Global
M – Extension cellular module; Part No.:
mPCIe-M
Bands M – LTE Cat M1/NB1/NB2, Global (incl. 450
MHz)
O – Extension cellular module; Part No.:
mPCIe-O
Bands O – LTE Cat M1/NB1/NB2, Global
G – Extension GPS (GNSS) module; Part No.: mPCIe-GPS
C – Extension module 2× RS232; Part No.: mPCIe-COMS
Note: just one option for mPCIe slot is possible
For legacy values E, P, A see User manual.
Var. – designation of product variant. This variant is fixed in unit HW and cannot be changed later on.
Possible values:
E – RipEX2, Data encryption possible.
N – RipEX2, Data encryption never possible.
H – RipEX2e, Data encryption possible. COM2 available.
J – RipEX2e, Data encryption never possible. COM2 available.
For legacy values C, D, X see User manual.
SW keys – if unit is ordered with SW keys, all keys are specified in this bracket. SW key can be ordered independently for specific S/N anytime later on.
Possible values:
Master – enables all functionalities of all possible SW feature keys, excl. Ex; Part No.: RipEX2-SW-MASTER, RipEX2e-SW-MASTER
Protocols – enables Radio protocols (Flexible, Base driven); Part No.: RipEX2-SW-PROTOCOLS
Dynamic routing – enables Dynamic routing (Babel, OSPF, BGP, Link management, PPPoE); Part No.: RipEX2-SW-DYNAMIC-ROUTING
Speed – enables 256QAM, Channels > 50kHz, Full duplex, RipEX2 only; Part No.: RipEX2-SW-SPEED
Power – enables RF power 40 dBm PEP; Part No.: RipEX2-SW-POWER
Security – enables IPsec, OpenVPN, RADIUS, Multiple users; Part No.: RipEX2-SW-SECURITY
SFP – enables SFP interface, RipEX2 only; Part No.: RipEX2-SW-SFP
COM2 – enables COM2 interface, RipEX2e only; Part No.: RipEX2e-SW-COM2
Ex - authorization for use RipEX2 in hazardous location II 3G Ex ic IIA T4 Gc. Part No.: RipEX2-Ex (Note: Ex keys are available only for units produced after 1st of January 2022)
Region – used for countries where specific restrictions are required. Available only on special request when ordering. If used, it is indicated in bracket along with the SW keys.
Possible values:
US – USA, Allowed freq. according to FCC part
90
RipEX2 - 1A: 150.8 - 156.2475, 157.1875 - 161.575, 161.775 - 161.9625,
162.0375 - 170.0 MHz; Reg. ID: 1A-FCC_Part_90
RipEX2 - 4A: 4A: 406.1 -
454.0, 456 - 462.5375, 462.7375 - 467.5375, 467.7375 - 470.0 MHz; Reg. ID:
4A-FCC_Part_90
RU – Russia, Allowed freq. according to Russian
regulations
RipEX2 - 1A: 146.0 - 174.0 MHz; Reg. ID:
1A-Russia
RipEX2 - 4A: 403.0 - 410.0, 433.0 - 450.0 MHz; Reg. ID:
4A-Russia
RipEX2 - 4A: 433.0 - 450.0 MHz; Adjusted product label; Reg. ID:
4-Russia
BR – Brazil, 6.25 kHz channel not
allowed
RipEX2 - 4A: Additional sticker (Anatel 16763) on product and
paper box; Reg. ID: 4A-Brazil
MX – Mexico, Additional sticker on product and paper box
Type – specific product type
Possible values:
RipEX2-1
RipEX2-3
RipEX2-4
Code – part of order code which is printed on Product label on the housing (SW keys are not HW dependent and can be ordered later on, so they are not printed on Product label).
Order code – the complete product code, which is used on Quotations, Invoices, Delivery notes etc.
In order to find out the correct Order code, please use E-shop.
* The processor included in the unit uses an encryption module listed as 5A002 a.1 in the
Regulation (EU) 2021/821, setting up a Community regime for the control of exports, transfer,
brokering and transit of dual-use items. Units are subject to export control when exporting
outside the European union, according to national, EU and US law (ECCN 5A002 a.1), see https://policy.trade.ec.europa.eu/help-exporters-and-importers/exporting-dual-use-items_en.
In the case of export from the country where the units were delivered by
, the exporter must inform of the new country of delivery. X was
under production until XII/2022
Trade name – trade and marketing name of the product. This name is used for all products within the same product family.
Possible values: RipEX
Band – frequency band
Possible values:
135 (tuning range 135–154 MHz)
154 (tuning range 154–174 MHz)
215 (tuning range 215–240 MHz)
300 (tuning range 300–320 MHz)
320 (tuning range 320–340 MHz)
340 (tuning range 340–360 MHz)
368 (tuning range 368–400 MHz)
400 (tuning range 400–432 MHz)
432 (tuning range 432–470 MHz)
470 (tuning range 470–512 MHz)
928 (tuning range 928–960 MHz)
Var. – designation of product variant, if it is used. Generally, more variants can be used within one unit, i.e. more letters can be on this position. These variants can’t be ordered and included in the unit later on.
Possible values:
none - basic model
D – Separate connectors for RX and TX antennas, Part No. RipEX-HW-DUAL
G – Internal GPS module, Part No. RipEX-HW-GPS
N – Encryption features will never be possible, neither HW nor SW encryption
S – Up to 50 kHz channel spacing, Part No. RipEX-HW-50kHz (only versions before 2014 didn´t support var. ´S´)
P – Ingress Protection level IP51, Part No. RipEX-HW-IP51
SW keys – if unit is ordered with SW keys, all keys are specified in this bracket. SW key can be ordered independently for specific S/N anytime later on.
Possible values:
Master – enables all functionalities of all possible SW feature keys, Part No. RipEX-SW-MASTER
Router – enables Router mode. If not activated, only Bridge mode is available, Part No. RipEX-SW-ROUTER
Backup routes – enables Backup routes, Part No. RipEX-SW-BACKUP ROUTES
Speed – enables the two highest speeds (D8PSK, 16DEQAM mod.) for 25 and 50 kHz channel, Part No. RipEX-SW-SPEED
10W – enables RF output power 10 W for CPFSK modulations, Part No. RipEX-SW-10W
COM2 – enables the second serial interface configurable as RS232 or RS485, Part No. RipEX-SW-COM2
Ex – authorization for use RipEX in hazardous location Ex II 3G Ex ic IIC T4 Gc. Part No.: RipEX-Ex (Note: Ex keys are available only for units produced after 1st of January 2014)
Region – used for countries where specific restrictions are required. Available only on special request when ordering. If used, it is indicated in bracket along with the SW keys.
Possible values:
BR – Brazil, RipEX - 368: Anatel sticker 09610
MX – Mexico, Import sticker on paper box, SOL0903113T3
Type – specific product type for which type approvals like CE, FCC etc. are issued
Possible values:
RipEX-160 for Bands 135, 154 (RipEX-135, RipEX-154 in Code)
RipEX-200 for Bands 215 (RipEX-215 in Code)
RipEX-300 for Bands 300, 320, 340 (RipEX-300, RipEX-320, RipEX-340 in Code)
RipEX-400 for Bands 368, 400, 432, 470 (RipEX-368, RipEX-400, RipEX-432, RipEX-470 in Code)
RipEX-900 for Bands 928 (RipEX-928 in Code)
Code – part of order code which is printed on
Product label on the housing (SW keys are not HW depend-ent and can be ordered later on,
so they are not printed on Product label).
Note: Number in Type (e.g.
RipEX-400) in Code is replaced by Band (e.g. RipEX-368, RipEX-400, RipEX-432,
RipEX-470)
Order code – the complete product code, which is used on Quotations, Invoices, Delivery notes etc.
In order to find out the correct Order code, please use E-shop.
| RipEX2 | RipEX2e | RipEX | |
| Max. Speed | 1.7 Mb/s @ 256QAM |
250 kb/s @ 64QAM |
166 kb/s @ 16DEQAM |
| Speed @ 25 kHz | 167 kb/s | 125 kb/s | 83 kb/s |
| Channel size | 6.25 – 300 kHz | 6.25 – 50 kHz | 6.25 – 50 kHz |
| Interfaces | 4×ETH, 1×SFP, 1×COM, 1×USB | 2×ETH,2×COM, 1×USB | 1×ETH,2×COM, 1×USB |
| mPCIe | Yes | No | No |
| Full duplex | Yes | No | No |
| Fully Redundant Hot Standby Master Station | Yes | No | Yes |
| Management Access | 4 levels | 4 levels | 2 levels |
| IPsec | Yes | Yes | Yes |
| RADIUS | Yes | Yes | No |
| Radio parameters | RipEX2 | RipEX2e | ||||
| Frequency bands | 135 – 175 MHz
285 – 335; 335 – 400 MHz 400 – 470; 450 – 520 MHz 803 – 897; 860 – 960 MHz |
|||||
| Channel spacing | 6.25; 12.5; 25; 50; 100; 150; 200; 250; 300 kHz | 6.25; 12.5; 25; 50 kHz | ||||
| Frequency stability | ±0.5 ppm ±0.01 ppm with internal (optional) GNSS (GPS) or external time synchronisation, see details |
±0.5 ppm | ||||
| Modulation | QAM: 256QAM; 64QAM; 16DEQAM; D8PSK; π/4DQPSK;
DPSK FSK: 4CPFSK; 2CPFSK, see details |
QAM: 64QAM; 16DEQAM; D8PSK; π/4DQPSK;
DPSK FSK: 4CPFSK; 2CPFSK, see details |
||||
| FEC (Forward Error Correction) | 2/3; 3/4; 5/6; Off
Trellis code with Viterbi soft-decoder |
|||||
| Gross data rate (data speed) 1) | Channel spacing
[kHz] |
Gross data rate
(modulation rate)
[kb/s] |
Channel spacing
[kHz] |
Gross data rate
(modulation rate)
[kb/s] |
||
| 6.25 | 35 | 6.25 | 26 | |||
| 12.5 | 83 | 12.5 | 63 | |||
| 25 | 167 | 25 | 125 | |||
| 50 | 333 | 50 | 250 | |||
| 100 | 555 | |||||
| 150 | 925 | |||||
| 200 | 1111 | |||||
| 250 2) | 1389 | |||||
| 300 2) | 1736 | |||||
| Transmitter | ||||||
| RF Output power | QAM: 0.1 – 5.0 W (20 – 37
dBm) RMS in 1dB step 3)
FSK: 0.1 – 10 W (20 – 40 dBm) in 1dB step see details |
|||||
| Duty cycle | Continuous | |||||
| Rx to Tx Time | < 2 ms @ 6.25 kHz
channel < 1.0 ms @ 12.5 kHz channel < 0.7 ms @ 25 kHz channel |
|||||
| Spurious Emissions (Conducted) | < -36 dBm | |||||
| Radiated Spurious Emissions | < -36 dBm | |||||
| Adjacent channel power | < -60 dBc | |||||
| Transient adjacent channel power | < -60 dBc | |||||
| Receiver | ||||||
| Anti-aliasing Selectivity | 56 kHz
@ -3 dB
BW applicable for 6.25; 12.5; 25 kHz
500 kHz @ -3 dB BW applicable for 50; 100; 150; 200; 250; 300 kHz |
56 kHz
@ -3 dB
BW applicable for 6.25; 12.5; 25 kHz
500 kHz @ -3 dB BW applicable for 50 kHz |
||||
| Tx to Rx Time | < 2 ms @ 6.25 kHz
channel < 1.0 ms @ 12.5 kHz channel < 0.7 ms @ 25 kHz channel |
|||||
| Maximum Receiver Input Power | 20 dBm (100 mW) | |||||
| Rx Spurious Emissions (Conducted) | < -57 dBm | |||||
| Radiated Spurious Emissions | < -57 dBm | |||||
| Blocking or desensitization | > -23 dBm
@ 1 MHz
> -19 dBm @ 2 MHz > -15 dBm @ 5 MHz > -13 dBm @ 10 MHz |
|||||
| Spurious response rejection | > 70 dB | |||||
| Technical parameters are subject to change without prior notification. | ||||||
| 1) | Network throughput varies and depends heavily on the data structure, optimization effectivity, protocol on Radio channel, network topology, signal budgets and many other parameters of the network. Practical tests are recommended. | |||||
| 2) | Available only in Bridge mode. | |||||
| 3) | Max peak envelope power (PEP) 10 W (40 dBm) . | |||||
| Electrical | RipEX2 | RipEX2e | |||
| Primary power | 10 to 30 VDC, negative GND | ||||
| Rx | 8 W / 13.8 V, see details | ||||
| Tx | 12 – 55 W, see details | ||||
| Sleep mode | 0.01 W | ||||
| Interfaces | |||||
| Ethernet | 10/100/1000Base-T Auto MDI/MDIX | 4× RJ45 | 10/100/1000Base-T Auto MDI/MDIX | 2× RJ45 | |
| SFP | 10/100/1000Base-T or 1000Base-SX or 1000Base-LX user exchangeable SFP with max. power consumption 1.25 W |
1× SFP | No SFP | ||
| COM | RS232 / RS485 SW configurable | DB9F | |||
| 600 b/s – 2 Mb/s | |||||
| COM2 | Extension module 'C' 2 × RS232 RJ45 | RS232 DB9F (COM1,COM2) | |||
| COM2: 600 b/s – 2 Mb/s; COM3: 2.4 kb/s – 921.6 kb/s |
600 b/s – 2 Mb/s | ||||
| USB | USB 3.0 | Host A | |||
| Antenna | 50 Ω SW configurable 1× Tx / Rx or 1× Rx + 1× Tx |
2× TNC female | 50 Ω 1× Tx / Rx |
1× TNC female | |
| Inputs/Outputs | 1× HW alarm input
1× HW alarm output 1× Sleep input |
Power connector |
|||
| 2× DI, 2× DO, 1× diffDI
not available when Extension module 'C' (COM ports) is used |
RJ45 | Not available | |||
| Indication LEDs | |||
| LED panel | 5× tri-color status LEDs (SYS, EXT, RX, TX, COM) | ||
| ETH | 4× RJ45 (Link and Activity LEDs), 1× SFP (Status LED) | ||
| Environmental | |||
| IP Code (Ingress Protection) | IP41, IP42, IP52 - see details | ||
| MTBF (Mean Time Between Failure) | > 900 000 hours (> 100 years) | ||
| Operating temperature | −40 to +70 °C ( −40 to +158 °F) 4) | ||
| Operating humidity | 5 to 95 % non-condensing | ||
| Storage | −40 to +85 °C ( −40 to +185 °F) / 5 to 95 % non-condensing | ||
| Mechanical | |||
| Casing | Rugged die-cast aluminium | ||
| Dimensions |
H×W×D: 60×185×125.5 mm (2.34×7.2×4.94 in) |
||
| Weight |
1.55 kg (3.4 lbs) |
||
| Mounting | DIN rail, L-bracket,
Flat-bracket, 19" Rack chassis
see details |
||
| SW | |||
| Operating modes | Bridge / Router | ||
| Radio channel protocols | Transparent @
Bridge Base driven, Flexible @ Router see details |
||
| User protocols on COM | DNP3, DF1, IEC101, Modbus RTU, PR2000, RDS, Siemens 3964(R), COMLI, SAIA S-bus, Mars-A, PPP, UNI, Async Link | ||
| User protocols on Ethernet | Modbus TCP, IEC104, DNP3 TCP, Comli TCP, Terminal server… | ||
| Serial to IP convertors | DNP3 / DNP3 TCP, Modbus RTU / Modbus TCP | ||
| Protocol on Radio channel | |||
| Multi master applications | Yes | ||
| Report by exception | Yes | ||
| Collision Avoidance Capability | Yes | ||
| Remote to Remote communication | Yes | ||
| Addressed and acknowledged serial SCADA protocols |
Yes | ||
| Data integrity control | CRC 32 | ||
| Optimization | Intelligent payload data and header (Eth / IP / TCP / UDP) compression | ||
| Security | |||
| Management | HTTPS (Web Interface or Application Programming Interface) | ||
| Role-based access control (RBAC) | 4 levels (Guest, Tech, SecTech, Admin) | ||
| WiFi management access (optional) | WPA2-PSK secured | ||
| Encryption | AES256-CCM | ||
| VPN | IPsec, OpenVPN, GRE | ||
| VLAN | IEEE 802.1Q (tagging), Q-in-Q for Transparent mode | ||
| AAA protocol | RADIUS | ||
| Firewall | Layer 2 - MAC, Layer 3 - IP, Layer 4 - TCP/UDP | ||
| FW | Digitally signed | ||
| HW tamper | Case opening evidence | ||
| 4) | When full-duplex with full power (40 dBm PEP) and the surrounding temperature above + 60°C the external passive cooler should be used (e.g. RipEX2-RS 19" Rack chassis). | ||
| Diagnostic and Management | |
| Link testing | ICMP ping, RSS ping |
| Status information | User interfaces |
| Statistics |
Historical and differential statistics for Rx / Tx Packets on all user
interfaces (ETH 1-5, COM 1-3, TS 1-5) and Radio interface - for individual
connections. |
| Statistics history | Several weeks |
| Event log | Events filtered by time, severity, user, remote IP address and type of event |
| SNMP | SNMPv1, SNMPv2c, SNMPv3 Trap / Inform alarms generation as per settings |
| NTP | Client / Server |
| Monitoring | Real time analysis of all interfaces (RADIO, ETH 1-5 , COM 1-3, TS 1-5) and internal interfaces between software modules, see details |
| Standards | |
| CE | RED; RoHS; WEEE |
| FCC, IC | FCC Part 90, IC RSS-119 |
| Spectrum | ETSI EN 302 561 V2.1.1 ETSI EN 300 113 V2.2.1 |
| EMC (electromagnetic compatibility) |
ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-5 V3.2.1 EN 61850-3:2014 |
| Product safety | EN 62368-1:2014 + A11:2017 |
| RF health safety | EN 62311:2008 |
| Electric power substations environment |
IEEE 1613:2009 IEEE 1613.1:2013 EN 61850-3:2014 |
| Hazardous locations | EN 60079-0:2012 EN 60079-11:2012 |
| Environmental | EN 61850-3: 2014 |
| Vibration & shock |
EN 60068-2-6:2008 |
| Seismic qualification | EN 60068-2-27:2010 |
| IP rating | EN 60529:1993 + A1:2001 + A2:2014 |
| Optional interfaces (not applicable for RipEX2e) | ||
|
Extension module 'G' |
Active antenna 3.3 VDC SMA female (EXT on front panel) | |
| 72-channel u-blox M8 engine GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1I, Galileo E1B/C, SBAS L1 C/A: WAAS, EGNOS, MSAS, GAGAN | ||
|
Extension module 'C' |
COM2: RS232 - 5 pin (RxD, TxD, GND, RTS, CTS) 600 b/s to 2 Mb/s COM3: RS232 - 3 pin (RxD, TxD, GND) 2.4 kb/s to 921.6 kb/s RJ45 (DI/DO on front panel) |
|
|
Extension module 'W', 'M', 'O'
|
see details | |
| Radio parameters | ||||||||||||||
| Frequency bands | 135 – 154; 154 – 174 MHz 215 – 240 MHz 300 – 320; 320 – 340; 340 – 360 MHz 368 – 400; 400 – 432; 432 – 470 MHz 470 – 512 MHz 928 – 960 MHz see details |
|||||||||||||
| Channel spacing | 6.25; 12.5; 25; 50 kHz 1) | |||||||||||||
| Frequency stability | ±1.0 ppm | |||||||||||||
| Modulation | QAM (linear): 16DEQAM; D8PSK; π/4DQPSK; DPSK | |||||||||||||
| FSK (exponential): 4CPFSK; 2CPFSK | see details | |||||||||||||
| FEC (Forward Error Correction) | On/Off, ¾ Trellis code with Viterbi soft-decoder | |||||||||||||
| Gross data rate (data speed) 2) |
|
|||||||||||||
| Transmitter | ||||||||||||||
| RF Output power | QAM: 0.5 – 2 W
3) FSK: 0.1 – 10 W 4) see details |
|||||||||||||
| Duty cycle | Continuous | |||||||||||||
| Rx to Tx Time | < 1.5 ms | |||||||||||||
| Intermodulation Attenuation | > 40 dB | |||||||||||||
| Spurious Emissions (Conducted) | < -36 dBm | |||||||||||||
| Radiated Spurious Emissions | < -36 dBm | |||||||||||||
| Adjacent channel power | < -60 dBc | |||||||||||||
| Transient adjacent channel power | < -60 dBc | |||||||||||||
| Receiver | ||||||||||||||
| Sensitivity | -113 dBm (12.5 kHz, 2CPFSK, BER 10-6, 3/4 FEC, see details | |||||||||||||
| Anti-aliasing Selectivity | 50 kHz @ -3 dB BW | |||||||||||||
| Tx to Rx Time | < 1.5 ms | |||||||||||||
| Maximum Receiver Input Power | 20 dBm (100 mW) | |||||||||||||
| Rx Spurious Emissions (Conducted) | < -57 dBm | |||||||||||||
| Radiated Spurious Emissions | < -57 dBm | |||||||||||||
| Blocking or desensitization | see details | |||||||||||||
| Spurious response rejection | > 70 dB | |||||||||||||
| 1) | 50 kHz channel spacing is HW dependent, versions before 2014 didn´t support it. 6.25 kHz channel spacing is not available for RipEX-928. | |||||||||||||
| 2) | Network throughput varies and depends heavily on the data structure, optimization effectivity, protocol on Radio channel, network topology, signal budgets and many other parameters of the network. Practical tests are recommended. | |||||||||||||
| 3) | Max peak envelope power (PEP) 7.0 W | |||||||||||||
| 4) | For output power 10 W it is recommended to use input power above 11 VDC. | |||||||||||||
| RipEX-470, RipEX-928 - max. RF Output power 8 W. | ||||||||||||||
| Electrical | ||||
| Primary power | 10 to 30 VDC, negative GND | |||
| Rx | 5 W / 13.8 V; 4.8 W / 24 V; (Radio part < 2 W) | |||
| Tx | 13 – 40 W, see details | |||
| Sleep mode | 0.1 W | |||
| Save mode | 2 W | |||
| Interfaces | ||||
| Ethernet | 10/100 Base-T Auto MDI/MDIX | RJ45 | ||
| COM1 | RS232 | DB9F | ||
| 300 – 115 200 b/s | ||||
| COM2 | RS232/RS485 SW configurable | DB9F | ||
| 300 – 115 200 b/s | ||||
| USB | USB 1.1 | Host A | ||
| Antenna | 50 Ω | TNC female | ||
| Inputs/Outputs | 1x HW alarm input 1x HW alarm output 1x Sleep input |
Power connector | ||
| Indication LEDs | |||
| LED panel | 7× tri-color status LEDs (Power, ETH, COM1, COM2, Rx, Tx, Status) |
||
| Environmental | |||
| IP Code (Ingress Protection) | IP40, (IP51 - see details) | ||
| MTBF (Mean Time Between Failure) | > 900 000 hours (> 100 years) | ||
| Hazardous lodations | Ex II 3G Ex ic IIC T4 Gc | ||
| Operating temperature | −40 to +70 °C (−40 to +158 °F) | ||
| Operating humidity | 5 to 95 % non-condensing | ||
| Storage | −40 to +85 °C (−40 to +185 °F) / 5 to 95 % non-condensing | ||
| Mechanical | |||
| Casing | Rugged die-cast aluminium | ||
| Dimensions | H × W × D: 50 × 150 × 118 mm (1.97 × 5.9 × 4.65 in) | ||
| Weight | 1.1 kg (2.4 lbs) | ||
| Mounting | DIN rail, L-bracket, Flat-bracket, 19" Rack shelf | ||
| SW | |||
| Operating modes | Bridge / Router | ||
| Radio channel protocols | Transparent @ Bridge Base driven, Flexible @ Router see details |
||
| User protocols on COM |
Modbus, IEC101, DNP3, PR2000, UNI, Comli, DF1, RP570, Profibus, … |
||
| User protocols on Ethernet | Modbus TCP, IEC104, DNP3 TCP, Comli TCP,
Terminal server… |
||
| Serial to IP convertors | Modbus RTU / Modbus TCP, DNP3 / DNP3 TCP | ||
| Protocol on Radio channel | |||
| Multi master applications | Yes | ||
| Report by exception | Yes | ||
| Collision Avoidance Capability | Yes | ||
| Remote to Remote communication | Yes | ||
| Addressed & acknowledged serial SCADA protocols |
Yes | ||
| Data integrity control | CRC 32 | ||
| Optimization | Payload data and Ethernet / IP / TCP / UDP header compression, Packet flow on Radio channel optimization | ||
| Security | |||
| Management | HTTP, HTTPS (own certificate), SSH | ||
| Access accounts | 2 levels (Guest, Admin) | ||
| Encryption | AES256-CCM | ||
| VPN | IPsec, GRE | ||
| VLAN | IEEE 802.1Q (tagging), Q-in-Q for Transparent mode | ||
| Firewall | Layer 2 - MAC, Layer 3 - IP, Layer 4 - TCP/UDP | ||
| Diagnostic and Management | |||
| Radio link testing | Yes (ping with RSS, Data Quality, Homogeneity) | ||
| Watched values (Can be broadcast to neighbouring units. Received info displayed in Neighbours table) | Device - Ucc, Temp, PWR, VSWR, *HW Alarm
Input. Radio channel - *RSScom, *DQcom, TXLost [%] User interfaces - ETH (Rx/Tx), COM1 (Rx/Tx), COM2 (Rx/Tx) * not broadcast |
||
| Statistics | For Rx/Tx Packets on User interfaces (ETH, COM1, COM2) and for User data and Radio protocol (Repeats, Lost, ACK etc.) on Radio channel | ||
| Graphs | For Watched values and Statistics | ||
| History (Statistics, Neighbours, Graphs) |
20 periods (configurable, e.g. days) | ||
| SNMP | SNMPv1, SNMPv2c, SNMPv3 SNMP Traps or SNMP Informs generation for Watched values |
||
| NTP | Client, Server (synchronized from internal GPS) | ||
| Monitoring | Real time/Save to file analysis of all physical interfaces (RADIO, ETH, COM1, COM2) and some internal interfaces between software modules (e.g. Terminal servers, Modbus TCP server etc.) | ||
| Standards | |
| CE | RED, RoHS, WEEE |
| FCC, IC | FCC Part 90, Pending: IC RSS-119 |
| Spectrum | ETSI EN 302 561 V2.1.1:2017 ETSI EN 300 113 V2.2.1:2017 |
| EMC (electromagnetic compatibility) | ETSI EN 301 489-1 V2.1.1:2017 ETSI EN 301 489-5 V2.1.1:2017 IEC 1613:2009 Class 1 |
| Safety | EN 60950-1:2006, A11:2009, A1:2010, A1:2010, A12:2011, A2:2013 |
| SAR | EN 50385:2002 EN 50383ed.2:2011 |
| Vibration & shock | EN 61373:1999 EN 60068-2-6:2008 |
| Seismic qualification | IEC 980:1989 (seismic category 1a) |
| Hazardous locations | EN 60079-0:2012 EN 60079-11:2012 |
| IP rating | EN 60529:1993 + A1:2001 + A2:2014 |
RACOM je prvovýrobce a proto neposkytuje rozvoz všech dostupných doplňků k vlastním výrobkům. Tento seznam obsahuje otestované příslušenství, které je fa RACOM připravena dodat v rámci RipEX jednotek. Komponenty jsou drženy pouze v omezeném množství, a dodací lhůta proto může být ovlivněna potřebou subdodávek. Pokud požadujete další příslušenství, prosím kontaktujte nás nebo svého dodavatele.
DC napájecí zdroj, DIN lišta
DC napájecí zdroj s nabíjením baterie
Klipsy na DIN lištu
Plochý držák
L držák
S držák
19″ šasi
RipEX
RipEX2
Ochrana IP52
Wifi adaptér
Wifi adaptér 2
USB/ETH adaptér
USB/ETH adaptér 2
Podporovány jsou všechny běžné typy SFP modulů. RACOM může k jednotkám RipEX2 dodat dva základní testované moduly. Pokud potřebujete jiné moduly, prosím kontaktujte nás nebo svého dodavatele.
Optický SFP modul
Ethernetový SFP modul
Koaxiální patch kabel
Adaptér RJ45/šroubovací svorky
Koaxiální konektory
RG58
RG213
H1000
Napájecí konektor
Antény
Doporučujeme objednávat antény samostatně od místních dodavatelů. V případě potřeby je RACOM schopen jejich dodávku zajistit. Pokud potřebujete pomoc nebo konzultaci, neváhejte nás kontaktovat.
Anténní zátěž
Duplexery
Migrační řešení
Tyto doplňky se doporučují při provádění Migrace sítí.
Migrační Sériový kabel
Automatický přepínač antény
Příslušenství dodávané s každou jednotkou RipEX, RipEX2 a RipEX2e
Nastavení RipEXu
|
Použijte naše výpočty pro zjednodušený pohled na výkon sítě. Nastavení RipEXu je shodné pro oba výpočty (Uživatelský datový tok, Výkon sítě). Díky prvnímu výpočtu zjistíte orientační užitečnou bitovou rychlost. Druhý výpočet je složitější a podrobnější. Zobrazte si nápovědu pro detaily. | ||||||||||||||||
Uživatelský datový tokDíky tomuto výpočtu můžete vidět, jaký vliv má délka paketů na výslednou bitovou rychlost. Čím delší jsou pakety, tím vyšší je bitová rychlost (rádiová režie RipEXů zůstává fixní).
|
Výkon sítěTento výpočet vám poskytne rychlý výkonnostní přehled sítě založený na několika základních parametrech. | ||||||||||||||||
| Leták A4 - ver.4.1 | ripex-dsA4-cz.pdf | 2 743 kB | 08.04.2024 |
| Uživatelský manuál RipEX2, RipEX2e (anglicky) | ripex2-man-en.pdf | 27 013 kB | 14.03.2024 |
| Uživatelský manuál RipEX (anglicky) | ripex-man-en.pdf | 12 141 kB | 10.03.2022 |
| Uživatelský manuál RipEX - zkrácený | ripex-mansh-cz.pdf | 7 440 kB | 15.03.2019 |
| Base Driven protocol | ripex-base-driven-protocol-is.pdf | 2 427 kB | 07.01.2020 |
| Data speed | ripex-data-speed-is.pdf | 1 796 kB | 07.01.2020 |
| Flexible protocol | ripex-flexible-protocol-is.pdf | 508 kB | 07.01.2020 |
| Hybrid networks | ripex-hybrid-networks-is.pdf | 1 924 kB | 07.01.2020 |
| Migration solution | ripex-migration-solution-is.pdf | 898 kB | 07.01.2020 |
| Power distribution - CFE, Mexico | ripex-cs-cfe-en.pdf | 2 902 kB | 25.02.2016 |
| Water management - WSC, Malta | ripex-cs-wsc-en.pdf | 1 281 kB | 24.09.2015 |
| WSC Malta whitepaper | wsc-psaila-wp-en.pdf | 443 kB | 24.09.2015 |
| RipEX Firmware package 1.9.7.0 | ra1-RACOM-1.9.7.0.cpio | 11 873 kB | 23.07.2021 |
| Firmware přehled změn (anglicky) | ripex-fw-rn-en.pdf | 368 kB | 11.05.2022 |
| MIB tabulky | ripex-mib.zip | 26 kB | 16.09.2019 |
| Zabbix ver. 6 templates | ripex-zabbix-v6.0.zip | 4 480 kB | 23.06.2022 |
| Firmware | ripex2-fw-2.1.6.0.fwp | 34 789 kB | 13.03.2024 |
| Firmware | ripex2-fw-2.1.6.0-patch-2.1.2.0.fwp | 4 496 kB | 13.03.2024 |
| Firmware Release notes | ripex2-fw-rn-en.pdf | 571 kB | 28.03.2024 |
| MIB table 2.1.6.0 | ra2-mib-2.1.6.0.zip | 24 kB | 13.03.2024 |
| Zabbix ver. 6 templates 2.1.6.0 | ripex2-zabbix-6.0-2.1.6.0.zip | 5 023 kB | 12.03.2024 |
| USB adaptéry | |||
| Adaptér USB/ETH (RipEX2, M!DGE2, RAy3), Axagon | OTH-USB_ETH-XR.pdf | 110 kB | 18.08.2020 |
| Adaptér USB/ETH (RipEX, RipEX2, M!DGE2, RAy2, RAy3), i-tec | OTH-USB_ETH-U2.pdf | 398 kB | 16.04.2021 |
| Adaptér USB/Wifi (RipEX2, RAy2, RAy3), Ogemray | OTH-USB_WIFI-W2.pdf | 219 kB | 10.12.2018 |
| SFP moduly | |||
| SFP modul, 1 Gb Ethernet, RJ45, EDGE | SFP-RJ45-1G-EDGE.pdf | 291 kB | 16.01.2021 |
| SFP modul, 2 vlákna, SM, LC, 20 km, 0.5W, EDGE | SFP-2F-1G-EDGE.pdf | 477 kB | 08.11.2019 |
| Napájecí zdroje | |||
| Spínaný zdroj 90-264VAC/12VDC/75W, DIN, MeanWell | PWS-AC,DC_12VDC_75W2.pdf | 654 kB | 23.08.2021 |
| Zálohovaný zdroj 90-260VAC/13.8VDC/97W | PWS-AC,DC_13.8VDC_97W.pdf | 1 113 kB | 05.08.2020 |
| Montáž | |||
| 19" šasi pro RipEX | RipEX-Rx.pdf | 721 kB | 11.12.2019 |
| 19" šasi pro RipEX2 | RipEX2-Rx.pdf | 2 011 kB | 03.02.2021 |
| Držák pro boční montáž | HOL-RipEX2-S.pdf | 834 kB | 06.02.2023 |
| Držák pro plochou montáž | HOL-RipEX1-2-FLAT.pdf | 971 kB | 10.12.2019 |
| Držák pro vertikální montáž | HOL-RipEX1-2-L.pdf | 1 643 kB | 03.02.2021 |
| Sada protiprachových krytek pro RipEX2 | SET-RipEX2-IP5x.pdf | 1 837 kB | 03.02.2021 |
| Přepěťová ochrana | |||
| Přepěťová ochrana koaxiální, N(f)/N(f), PLZ0A(B)-LPZ1, Polyphaser | SURGE-COAXIAL.pdf | 414 kB | 12.05.2017 |
| Kabely & konektory | |||
| Adaptér RJ45/Šroubovací svorky (RipEX2, M!DGE3), Poyiccot | RJ45-Terminals-adapter.pdf | 244 kB | 10.04.2024 |
| Koaxiální kabel H1000 | CAB-H1000.pdf | 217 kB | 14.03.2019 |
| Koaxiální kabel RG213 | CAB-RG213.pdf | 49 kB | 14.03.2019 |
| Koaxiální kabel RG58 | CAB-RG58.pdf | 78 kB | 14.03.2019 |
| Konektor N male, pro H1000, šroubovací, PPC | CON-Nm-H1000.pdf | 134 kB | 14.03.2019 |
| Konektor N male, pro RG213, krimpovací, Rosenberger | CON-Nm-RG213.pdf | 65 kB | 14.03.2019 |
| Konektor N male, pro RG58, krimpovací, Rosenberger | CON-Nm-RG58.pdf | 84 kB | 14.03.2019 |
| Konektor, RipEX, Napájecí zásuvka se svorkami | CON-RipEX-PWR.pdf | 238 kB | 14.03.2019 |
| Migrace sítí | |||
| Automatický přepínač antény včetně kabelů | OTH-MIG-AAS.pdf | 198 kB | 21.07.2022 |
| DEMO kufr | |||
| DEMO (anglicky) | ripex-case-man-en.pdf | 3 640 kB | 10.04.2019 |
© 2024 RACOM s.r.o. All Rights Reserved.
